A. flexural tensile strength
B. direct tensile strength
C. compressive strength
D. split tensile strength
Related Mcqs:
- The relation between modulus of rupture fcr, splitting strength fcs and direct tensile strength fcl is given by_______________?
A. tcr – rcs = tct
B. fcr>fcs>fc
C. fcr<fcs
D. fc5>fcr>fC - To determine the modulus of rupture, the size of test specimen used is_______________?
A. 150 x150 x500 mm
B. 100 x100 x700 mm
C. 150 x150 x700 mm
D. 100 x100 x500 mm - According to IS : 456 -1978, the modulus of elasticity of concrete Ec (in N/mm2) can be taken as______________?
A. Ec = = 5700
B. Ec = = 570
C. Ec = = 5700fck
D. Ec = where fck N/mm2 = 700 is the characteristic strength in - The relation between modulus of rupturefcr and characteristic strength of concrete fck is given by_______________?
A. fcr=0.35Vf7
B. fcr=0.57f7
C. fcr=0.7Vf7
D. fcr=1.2Vf7
where fcr and fck are in N/mm2′ - Minimum grade of concrete to be used in reinforced concrete as per IS:456-1978 is_____________?
A. M15
B. M20
C. M 10
D. M25 - The fineness modulus of fine aggregate is in the range of______________?
A. 2.0 to 3.5
B. 3.5 to 5.0
C. 5.0 to 7.0
D. 6.0 to 8.5 - Modulus of elasticity of steel as per IS : 456-1978 shall be taken as______________?
A. 20 kN/cm2
B. 200 kN/cm2
C. 200kN/mm2
D. 2xl06N/cm2 - Strength of concrete increases with________________?
A. increase in water-cement ratio
B. increase in fineness of cement
C. decrease in curing time
D. decrease in size of aggregate - Admixtures which cause early setting, and hardening of concrete are called_______________?
A. workability admixtures
B. accelerators
C. retarders
D. air entraining agents - The effect of adding calcium chloride in concrete is________________?
1. to increase shrinkage
2. to decrease shrinkage
3. to increase setting time
4. to decrease setting time
The correct answer is?
A. (1) and (3)
B. (1)and(4)
C. (2)and (3)
D. (2)and (4)
