Related Mcqs:

1. For determining the basic runway.length, the landing case requires that aircraft should come to a stop within p % of the landing distance. The value of p is________________?

   A. 40 %
   B. 50%
   C. 60%
   D. 75%

2. The centre to centre spacing of heliport lighting along the periphery of landing and take off area should be______________?

   A. 2.5 m
   B. 5.0 m
   C. 7.5 m
   D. 10.0 m

3. In approach areas of runways equipped with instrumental landing facilities any object within 4.5 km distance from runway end shall be considered as an obstruction if its height is more than______________?

   A. 20 m
   B. 30 m
   C. 45 m
   D. 51 m

4. Which of the following factors are taken into account for estimating the runway length required for aircraft landing ?

   1. Normal maximum temperature
   2. Airport elevation
   3. Maximum landing weight
   4. Effective runway gradient
   Select the correct answer using the codes given below Codes?

   A. 1,2,3 and 4
   B. 1,3, and 4
   C. 2 and 3
   D. 1,2 and 4

5. The size of landing area for multiengined helicopters operating under 1FR conditions is______________?

   A. 22.5 m x 22.5 m
   B. 30 m x 30 m
   C. 22.5 m x 30 m
   D. 60 mx 120 m

6. Assertion A : The ratio of arriving and departing aircrafts influences the airport capacity: Reason R :Landing operation is generally given priority over the taking off operation_________________?

   Select your answer based on the coding system given below?

   A. Both A and R are true and R is the correct explanation of A
   B. Both A and R are true and R is not the correct explanation of A
   C. A is true but R is false.
   D. A is false but R is true

7. Zero fuel weight of an aircraft is_________________?

   A. equal to empty operating weight
   B. equal to maximum landing weight
   C. less than empty operating weight
   D. equal to sum of empty operating weight and the maximum pay load

8. As per UK design criteria, if LCN of aircraft is between 1.25 to 1.5 times the LCN of pavement, then the number of movements allowed are__________________?

   A. Zero
   B. 300
   C. 3000
   D. Unrestricted

9. Consider the following statements: Wind rose diagram is used for the purposes of_________________?

   1. runway orientation
   2. estimating the runway capacity
   3. geometric design of holding apron
   select the correct answer?

   A. 1 and 2 are correct
   B. 2 and 3 are correct
   C. 1 and 3 are correct
   D. 1 alone is correct

10. For supersonic transport aircraft, the minimum turning radius of taxiway is________________?

    A. 60 m
    B. 120 m
    C. 180 m
    D. 240 m