1. runway orientation
2. estimating the runway capacity
3. geometric design of holding apron
select the correct answer?
A. 1 and 2 are correct
B. 2 and 3 are correct
C. 1 and 3 are correct
D. 1 alone is correct
Related Mcqs:
- Consider the following statements regarding iCAO recommendation for correction to basic runway length_________________?
1. The basic runway length should be increased at the rate of 7 percent per 300 m rise in elevation above the mean sea level
2. The basic runway length after having been corrected for elevation should be further increased at the rate of 1 percent for every 1°C rise in airport reference temperature above the standard atmospheric temperature at that elevation
3. The runway length after having been corrected for elevation and temperature should be further increased at the rate of 20% for every 1 percent of effective gradient
Select the correct statmentA. 1 and 2 are correct
B. 2 and 3 are correct
C. 1 and 3 are correct
D. 1,2 and 3 are correct - Calm period is the percentage of time during which wind intensity is less than______________?
A. 4.8 kmph
B. 6.4 kmph
C. 8.0 kmph
D. 9.6 kmph - The cruising speed of the aircraft is 500 kmph. If there is a head wind of 50 kmph, then the air speed and ground speed of the aircraft respectively will be_________________?
A. 450 kmph and 500 kmph
B. 500 kmph and 450 kmph
C. 450 kmph and 450 kmph
D. 500 kmph and 500 kmph - Which of the following factors are taken into account for estimating the runway length required for aircraft landing ?
1. Normal maximum temperature
2. Airport elevation
3. Maximum landing weight
4. Effective runway gradient
Select the correct answer using the codes given below Codes?A. 1,2,3 and 4
B. 1,3, and 4
C. 2 and 3
D. 1,2 and 4 - Which of the following is used for servicing and repairs of the aircraft ?
A. Apron
B. Hanger
C. Terminal building
D. holding apron - Which of the following is an example of failure in flexible pavements ?
A. Alligator cracking
B. Mud pumping
C. Warping cracks
D. Shrinkage cracks - For determining the basic runway.length, the landing case requires that aircraft should come to a stop within p % of the landing distance. The value of p is________________?
A. 40 %
B. 50%
C. 60%
D. 75% - The main disadvantage of angle nose out parking configuration of aircraft is that the_______________?
A. aircraft rear loading door is far away from terminal building.
B. hot blast is directed towards the terminal building
C. overall apron area required is more
D. all the above - Maximum gross take-off weight of an aircraft is__________________?
A. equal to the maximum structural landing weight
B. less than the maximum structural landing weight
C. more than the maximum structural landing weight
D. equal to the empty operating weight plus the payload - The size of landing area for multiengined helicopters operating under 1FR conditions is______________?
A. 22.5 m x 22.5 m
B. 30 m x 30 m
C. 22.5 m x 30 m
D. 60 mx 120 m
