A. 0.4 to 0.5 m
B. 0.5 to 0.7 m
C. 0.7 to 0.9 m
D. 0.9 to 1.20 m
Related Mcqs:
- Lead acetate test in sewer manhole is done to test the presence of ____________________?
A. Methane gas
B. Hydrogen sulphide
C. Carbondioxide gas
D. Diesel vapours - A manhole is generally provided at each__________________?
A. Bend
B. Junction
C. Change of gradient
D. All the above - If a paper moistened with lead acetate for five minutes when placed in manhole turns black. The sewer certainly contains__________________?
A. Hydrogen sulphide
B. Carbon dioxide
C. Methane
D. Oxygen - A safety lamp when inserted in the upper portion of a manhole causes flames. It indicates the presence of______________?
A. Carbondioxide gas
B. Hydrogen sulphide gas
C. Methane gas
D. Petrol vapours - A drop manhole is provided if__________________?
A. A sewer drops from a height
B. A branch sewer joins the main sewer at higher level
C. A lamp is inserted to check obstruction
D. None of these - If the flame of a miner’s safety lamp in a manhole extinguishes within 5 minutes, the sewer certainly contains_______________?
A. Hydrogen sulphide
B. Carbon dioxide
C. Methane
D. Oxygen - Cement concrete sewers are only suitable if non-scouring velocity is between_________________?
A. 2.5 to 3.0 m/sec
B. 3.0 to 4.0 m/sec
C. 3.5 to 4.5 m/sec
D. 4.5 to 5.5 m/sec - The sewage discharge in a detritus tank of a treatment plant is 576 litres/sec with flow velocity of 0.2 m/sec. If the ratio of width to depth is 2, the depth is____________________?
A. 100 cm
B. 110 cm
C. 120 cm
D. 150 cm - In circular sewers if depth of flow is 0.2 times the full depth, the nominal gradient,______________?
A. Is only provided
B. Is doubled
C. Is trebled
D. Is not enough - Normal depth in open channel flow is the depth of flow corresponding to_______________?
A. steady flow
B. unsteady flow
C. laminar flow
D. uniform flow
E. critical flow
