A. 1 kcal/kg = 1.8 BTU/lb = 4.186 kJ/kg
B. 1 BTU/ft3 = 8.9 kcal/m3 = 0.038 MJ/m3
C. 1 BTU/lb = 2.3 kcal/kg
D. 1 kcal/m3 = 0.1124 BTU/ft3
Related Mcqs:
- Pick out the wrong unit conversion of heat transfer rate?
A. 1 kcal/hr= 1.163 Watt
B. 1 Watt = 1.163 kcal/hr
C. 1 BTU/ft2.hr = 2.712 kcal/m2.hr
D. 1 kcal/m2.hr = 0.3687 BTU/ft2.hr = 1.163 Watt/m2 - Pick out the wrong unit conversion of temperature?
A. °R = 273 + °F
B. Temperature difference of 1°K = 1°C = 9/5°F
C. °C = (F- 32) × 0.555
D. °F = (°C + 17.778) × 1.8 - Pick out the wrong unit conversion of thermal conductivity ?
A. 1 BTU/ft2.hr.°F/ft = 1.488 kcal/m2. hr.°C/m
B. 1 BTU/ft2.hr.°F/inch = 1.488 kcal/m2. hr.°C/m
C. 1 kcal/m.hr.°C = 0.672 BTU/ft.hr.°F = 1.163 W/m. °K
D. 1 W/cm.°C = 85.985 kcal/m.hr.°C = 57.779 BTU/ft.hr.°F - Pick out the wrong unit conversion of heat transfer co-efficient?
A. 1 kcal/m2.hr.°C = 0.2048 BTU/ft2.hr. °F. = 1.163 W/m2.°K
B. 1 kcal/m2.hr.°K = 1.163 W/m2.°C
C. 1 W/m2.°C = 0.1761 BTU/ft2.hr.°F.
D. 1 BTU/ft2.hr.°F = 4.88 kcal/m2.hr.°C = 20.44 kJ/m2.hr°C = 5.678 W/m2.°C - Pick out the wrong unit conversion of mass transfer co-efficient?
A. 1 lb/hr.ft3.atm. = 4.8182 kg/hr.m2.bar
B. 1 kg/hr.m2.atm= 0.98687 kg/hr. m .bar
C. 1 lb/hr.ft2 = 4.8823 kg/hr.m2
D. 1 kg/hr.m2 = 4.8823 lb/hr.ft2 - Heat of ____________ of a fuel is called its calorific value?
A. Formation
B. Combustion
C. Reaction
D. Vaporisation - Pick out the correct conversion?
A. 1 BTU =453.6 calories
B. 1 BTU = 252 calories
C. 1 calorie = 252 BTU
D. 1 calorie = 453.6 BTU - Pick out the wrong statement?
A. Refractories used in muffle furnace should have low thermal conductivity
B. The electrical resistivity of refractories drops rapidly with rise in temperature
C. For reducing spalling tendency, the refractory should be well fired and its porosity should be more
D. Refractoriness under load (RUL) of a refractory is always less than its refractoriness - Pick out the wrong statement?
A. To make 100 kg of a solution containing 40% salt by mixing solution A (containing 25% salt) and solution B (containing 50% salt), the amount of solution A required is 40 kg
B. 1.2 gm atoms of carbon and 1.5 gm moles of oxygen are reacted to give 1 gm mole of carbon dioxide. The limiting reactant is carbon. The percent excess reactant supplied is 25
C. A gas bubble at a pressure of Pg is passed through a solvent with a saturation vapour pressure of Ps. If the time of passage of the bubble is long and air is insoluble in the solvent, the mole fraction of solvent in the bubble will be equal to Ps/Pg
D. A supersaturated solution of a sparingly soluble solute, at a concentration of C, is being fed to a crystalliser at a volumetric flow rate of V. The solubility .of the solute is C1. The output rate of solids from an efficient crystalliser is (C + C1) V - Pick out the wrong statement?
A. Heat capacity of a diatomic gas is higher than that of a monatomic gas
B. Equal volumes of Argon and Krypton contain equal number of atoms
C. Total number of molecules contained in 22.4 litres of hydrogen at NTP is 6.023 x 1023
D. The binary mixture of a particular composition in both vapor and liquid state is known as an azeotropic mixture