In packed towers provided with pall rings liquid redistributors are positioned at heights of every 6 metres or 5-10 times the column diameter, whichever is less. Maximum size of the pall rings should not exceed _______________________ of the column diameter?

Related Mcqs:

1. In packed towers provided with saddle packing, liquid redistributors are positioned at every _______________ times column diameter or 6 metres whichever is less?

   A. 2-3
   B. 5-8
   C. 10-15
   D. 20-25

2. Liquid redistribution should be done in a packed tower packed with raschig rings every 6 metres or ______________ times the column diameter, whichever is lower?

   A. 2.5-3.0
   B. 5-7.5
   C. 10-12.5
   D. 15-20

3. The difficulty of liquid distribution in packed towers is accentuated, when the ratio of tower diameter to packing diameter is_________________?

   A. < 30
   B. < 7
   C. > 7 20 < 50

4. Maximum size of the raschig rings used in a packed tower is about _______________ of the column diameter?

   A. 1/10th
   B. 1/20th
   C. 1/30th
   D. 1/50th

5. The operating velocity in the absorption tower is usually 40-50% of the flooding velocity. Packed absorption towers are normally designed for a pressure drop of about _________________ mm of water column per metre height of packing?

   A. 1-5
   B. 20-40
   C. 100-150
   D. 1000-1500

6. Bubble cap diameter used for the distillation column having diameter ranging from 1.5 to 4.5 metres is about ______________ mm?

   A. 10
   B. 50
   C. 100
   D. 200

7. In case of bubble cap distillation column of diameter greater than 1.2 metres, the cap diameter is roughly about _______________ cms?

   A. 10
   B. 20
   C. 30
   D. 35

8. Multiple blade paddle agitator is used for mixing high viscosity liquids/paste in which the paddle diameter is commonly 0.8 times the tank diameter. However, the width of the blade is in the range of ______________ times the paddle diameter?

   A. 0.1 to 0.25
   B. 0.3 to 0.5
   C. 0.5 to 0.6
   D. 0.65 to 0.80

9. In case of saddle packing (e.g., berl and intralox saddles), the maximum size of the packing should not exceed ______________ of the column diameter?

   A. 1/5th
   B. 1/15th
   C. 1/30th
   D. 1/50th

10. Commercial packed scrubbers are normally designed for a pressure drop range of ______________ mm water column per metre of packed height?

    A. 4-8
    B. 17-34
    C. 52-68
    D. 88-105