A. Z.H.ρ/L
B. L/Z.H.ρ
C. H.ρ/L
D. Z.H/ρL
Related Mcqs:
- Hold up of material in a operating rotary drier is in the range of___________________?
A. 0.05 to 0.15
B. 0.25 to 0.50
C. 0.5 to 0.8
D. 0.8 to 0.9 - Slope of counter-current flow rotary drier is in the range of ____________ meter/metre?
A. 0 to 0.08
B. 0 to 0.8
C. 0 to 1.5
D. 0 to 2.2 - Cylindrical shell thickness of rotary drier is generally _______________ mm?
A. 2-3
B. 18-22
C. 6-8
D. 12-15 - Height of the flights in the rotary drier is in the range of___________________?
A. 0.08 to 0.12 d
B. 0.02 to 0.05 d
C. 0.2 to 0.5 d
D. 0.5 to 0.6 d - The retention time of material in a rotary dryer depends upon its ______________________?
A. rpm
B. Slope & length
C. Flights arrangement
D. All A., B. and C. - For turbulent flow (NRe > 2100) of low viscosity fluid (μ > 20cp) in steel pipes, the optimum inside pipe diameter is given by(where, Q = fluid flow rate, ft3/sec, ρ = fluid density, lb/ft3 μ = fluid viscosity, centipoise Di = optimum inside pipe diameter, inches) ?
A. Di, opt = 3.9 Q0.45 ρ0.13
B. Di, opt = 3.9 Q0.45. μ0.95
C. Di, opt = 4.7 Q0.36. μ3.2ρ0.13
D. Di, opt = 3 Q0.36. μ0.88 - Normally, the length to diameter ratio of rotary dryers varies from 4 to 10 and for its economic operation; the number of transfer units (NTU) for such dryers varies from ?
A. 1.5-2.5
B. 3.5-5.5
C. 7.5-10.0
D. 10-15 - Length to diameter ratio of most rotary driers is in the range of____________________?
A. 1 to 2
B. 4 to 10
C. 10 to 20
D. 20 to 30 - The average velocity in the tubes of a 1-4 heat exchanger is ______________ times that in 1-1 heat exchanger having the same size & number of tubes and operated at same liquid flow rate ?
A. 2
B. 1/2
C. 4
D. 1/4 - If a single tube pass heat exchanger is converted to two passes; for the same flow rate, the pressure drop per unit length in tube side will _____________ times?
A. Increase by 1.8
B. Decrease by 22
C. Increase by 21.6
D. None of these
