A. Less
B. More
C. Same
D. Either A. or B.; no generalisation can be made
Related Mcqs:
- In a distillation column, bubble caps are located on trays with a pitch of ______________ times the outside diameter of the caps?
A. 1.3 to 2
B. 1.6 to 2
C. 2.5
D. 1.5 to 3 - In the allocated cap area, bubble caps are generally arranged on equilateral triangular pitch. Number of caps fixed on a plate is with a __________________?
A. Clearance of 25-75 mm
B. Cap pitch of 1.3-2 times the cap diameter
C. Either A. or B.
D. Neither A. nor B. - For a given design of bubble cap, the number of bubble caps to be used per tray is set by the _________________?
A. Allowable gas velocity through the slots
B. Plate spacing
C. Diameter of the column
D. All A., B. and C. - In distillation columns, bubble caps are held in place over trays by ________________?
A. Rivets
B. A hold down bar
C. Bolts
D. Both B. and C. - The ideal size of round bubble caps to be used in industrial distillation column having a diameter of 3-6 metres is ________________ cms?
A. 5
B. 15
C. 7.5
D. 50 - In a distillation column, minimum clearance to be maintained between the overflow weir and the last row of the bubble caps is ______________ cms?
A. 2.5
B. 7.5
C. 15
D. 20 - In a shell and tube heat exchanger for a given heat transfer surface area, smaller diameter tubes are favoured as compared to larger diameter ones; because the smaller diameter tubes ______________?
A. Are easier to clean
B. Are less prone to fouling
C. Can be fitted into a smaller shell diameter hence the cost of the heat exchanger would be less
D. None of these - Bubble cap diameter used for the distillation column having diameter ranging from 1.5 to 4.5 metres is about ______________ mm?
A. 10
B. 50
C. 100
D. 200 - Multiple blade paddle agitator is used for mixing high viscosity liquids/paste in which the paddle diameter is commonly 0.8 times the tank diameter. However, the width of the blade is in the range of ______________ times the paddle diameter?
A. 0.1 to 0.25
B. 0.3 to 0.5
C. 0.5 to 0.6
D. 0.65 to 0.80 - The most common standard size of bubble caps used in industrial operation is___________________?
A. 1″ dia cap with 0.5″ dia riser
B. 6″ dia cap with 4″ dia riser
C. 8″ dia cap with 1″ dia riser
D. 4″ dia cap with 8″ dia riser
Mcq Added by: admin