Which of the following relates the absorption & evolution of heat at the junctions of a thermocouple to the current flow in the circuit ?

Related Mcqs:

1. Relationship between absorption/evolution of heat at the thermocouple junctions and the current flow in the circuit is given by _____________ effect?

   A. Peltier B. Thomson C. Seebeck D. None of these...

2. The calibration data of a thermocouple with its cold junction at 0°C are given below. The hot junction of the thermocouple is placed in a bath at 80°C, while its cold junction is at 20°C. What is the emf of thermocouple ?

   A. 3.26 mv B. 0.80 mv C. 2.46 mv D. 2.43 mv...

3. Emf developed by a thermocouple while measuring a temperature of 800°C is about 31 mV. The type of thermocouple used is________________?

   A. Chromel-alumel B. Iron-constantan C. Platinum-platinum + rhodium D. None of these...

4. Emf developed by a thermocouple while measuring a temperature of 400°C is 22 mV. The type of thermocouple used is ___________________?

   A. Chromel-alumel B. Iron-constantan C. Platinum-rhodium D. Platinum-platinum + rhodium...

5. Emf developed by a thermocouple, while measuring a temperature of 600°C is about 5.5 mV. The type of thermocouple used is_______________?

   A. Chromel-alumel B. Iron-constantan C. Platinum-platinum + rhodium D. Either A., B. or C....

6. The temperature of tempering oil baths maintained at 400°C during heat treatment of steel is measured by a/an _____________ thermocouple?

   A. Chromel-alumel B. Iron-constantan C. Platinum-platinum/rhodium D. None of these...

7. Which of the following thermocouple materials does not contain nickel ?

   A. Alumel B. Chromel C. Constantan D. None of these...

8. Out of the following thermocouple wire insulating material, the highest temperature rating is for________________?

   A. Teflon B. Ceramic fibre C. Asbestos D. Fibre glass...

9. Water is entering a storage tank at a temperature T0 and flow rate Q0 and leaving at a flow rate Q and temperature T. There are negligible heat losses in the tank. The area of cross-section of the tank is A0. The model that describes the dynamic variation of temperature of water in the tank with time is given as________________?

   A. Q0(T0 – T) = Ac . h (dT/dt) B. Q0T0 – QT = Ac . h (dT/dt) C. Q(T0 – T) = Ac . h (dT/dt) D. Q(T0 – T) = Ac . (dTH/dt)...

10. Emf generated in a thermocouple depends on the temperature ___________________?

    A. Of cold junction only B. Of hot junction only C. Difference between hot and cold junctions D. Difference between cold junction and atmospheric temperature...