A. Are made by addition polymerisation reaction only
B. Contain an epoxy group (fig bellow) at the ends of the polymer
C. Are cross-linked polymers only
D. Use emulsion polymerisation methods
Related Mcqs:
- Epoxy resin is a polymer containing two or more groups of the bellow fig. is called epoxide group or ethoxyline group. It is a _______________?
A. Polyamide & an elastomer
B. Good adhesive
C. Surface coating agent
D. Both B. and C. - Cation exchange resins (0.3 to 1 mm size) used in water treatment is prepared from ______________ resins?
A. Epoxy
B. Phenol formaldehyde
C. Urea formaldehyde
D. Melamine formaldehyde - Thermosetting resins/polymers as compared to thermoplastic ones are ____________________?
A. Soluble in all organic solvents
B. More brittle
C. Formed by addition polymerisation only
D. Easily reshaped & reused - Branched chair polymers as compared to linear polymers have _________________?
A. Higher melting point
B. Higher tensile strength
C. Lower density
D. None of these - In a linear polymer, the monomeric units are linked together to form long straight chains. The cross linked or branched chain polymers compared to linear polymers have higher ___________________?
A. Densities
B. Melting point
C. Tensile strength
D. Hardness, rigidity & brittleness - Branched chain polymers compared to linear polymers have higher ____________________?
A. Density
B. Tensile strength
C. Melting point
D. Degree of irregularity in atomic packing - Cellulose acetate has very high film permeability among all the polymers of the order of 5000 gm/100 m2. Which of the following polymers has the maximum film elongation (of the order of 100%) ?
A. Water impermeable cellophane
B. Polythene
C. Cellulose acetate
D. Teflon - Epoxy resin is____________________?
A. Not used for surface coating
B. A good abrasive
C. An elastomer
D. A polyester - ______________ resins are produced by the condensation polymerisation of formaldehyde with urea or melamine?
A. Epoxy
B. Amino
C. Alkyd
D. Phenolic - Thermoplastic resins usually____________________?
A. Remain hard as long as they are hot
B. Cannot be reclaimed from waste
C. Permanent setting resins
D. Less brittle than thermosetting resins
