A. Stainless steel
B. Cast iron
C. High speed steel
D. Wooden plank
Advertisement
Related Mcqs:
- Introduction of slurry in a plate and frame filter press is done through a plate in each frame. The plate of this filter has a _______________ surface?
- A. Plane B. Curved C. Ribbed D. Either A. or B....
- Shell and leaf filter as compared to plate and frame filter _____________________?
- A. Entails less labor cost B. Facilitates filtration under higher pressure C. Provides more effective washing D. All A., B. & C....
- Flow of filtrate through the cake in a plate and frame filter press is best described by the ______________ equation?
- A. Kozeny-Carman B. Hagen-Poiseuille’s C. Fanning’s D. Kremser...
- In washing type plate and frame filter press, the ratio of washing rate to the final filtrate rate is__________________?
- A. 4 B. 1/4 C. 1 D. 1/2...
- The cake resistance increases steadily with the time of filtration in a plate and frame filter employing constant ______________ filtration?
- A. Rate B. Pressure C. Both A. & B. D. Neither A. nor B....
- In case of a plate and frame filter press, filtrate flow through the cake follows _______________ flow?
- A. Plug B. Turbulent C. Laminar D. None of these...
- Filter aids like asbestos, kieselguhr, diatomaceous earth etc. are used to increase the porosity of the final filter cake & reducing the cake resistance during filtration. Filter aid is_______________?
- A. Added to the feed slurry B. Pre-coated on the filter medium prior to filtration C. Separated from the cake by dissolving solids or by burning it off D. All A, B. & C....
- Filtrate flow rate in case of a rotary drum vacuum filter (in which Rm < < Rc) is proportional to ____________ and the cycle time (where, μ = filtrate viscosity Rm = filter medium resistance Rc = cake resistance)?
- A. √μ B. 1/√μ C. 1/μ D. 1/μ2...
- Moore filter is a ______________ filter ?
- A. Leaf B. Press C. Rotary D. Sand...
- For removal of very small amounts of precipitate from large volume of water, the most suitable filter is the ______________ filter?
- A. Plate & frame B. Shell & leaf C. Sand D. Rotary vacuum...
Advertisement