A. Cake thickness
B. Characteristics of the feed slurry
C. Both A. & B.
D. Neither A. nor B.
Related Mcqs:
- With increase in drum speed, in a rotary drum filter, the filtration rate_______________?
A. Increases
B. Increases linearly
C. Decreases
D. Is not affected - The basic filtration equation is given as dt/dV = (μ/A ΔP). [(α .CV/A) + Rm], where, V is volume of the filtrate; A is the filtration area, a is specific cake resistance, μ is viscosity of the filtrate, and C is the concentration of the solids in the feed slurry. In a 20 minutes constant rate filtration, 5 m3 of filtrate was obtained. If this is followed by a constant pressure filtration, how much more time in minutes, it will take for another 5 m3 of filtrate to be produced? Neglect filter medium resistance, Rm; assume incompressible cake ?
A. 10
B. 20
C. 25
D. 30 - Vacuum is applied in _______________ zone, in case of a general type continuous rotary drum vacuum filter?
A. Filtering
B. Washing
C. Drying
D. All A., B. & C. - Filtrate flow rate in case of a rotary drum vacuum filter (in which Rm < < Rc) is proportional to ____________ and the cycle time (where, μ = filtrate viscosity Rm = filter medium resistance Rc = cake resistance)?
A. √μ
B. 1/√μ
C. 1/μ
D. 1/μ2 - Percentage of drum submerged in the slurry in case of rotary drum filter is ________________?
A. 3
B. 30
C. 85
D. 25 - The controlling resistance in a rotary drum vacuum filter is the ________________ resistance?
A. Piping
B. Cake
C. Filter medium
D. None of these - The speed of a rotary drum vacuum filter may be about _____________ rpm?
A. 1
B. 50
C. 100
D. 500 - Filter aids like asbestos, kieselguhr, diatomaceous earth etc. are used to increase the porosity of the final filter cake & reducing the cake resistance during filtration. Filter aid is_______________?
A. Added to the feed slurry
B. Pre-coated on the filter medium prior to filtration
C. Separated from the cake by dissolving solids or by burning it off
D. All A, B. & C. - The cake resistance increases steadily with the time of filtration in a plate and frame filter employing constant ______________ filtration?
A. Rate
B. Pressure
C. Both A. & B.
D. Neither A. nor B. - Vacuum filter is most suitable for the_______________?
A. Removal of fines from liquid
B. Liquids having high vapour pressure
C. Liquids of very high viscosity
D. None of these