A. Reflux ratio
B. Plate efficiency to be achieved
C. Thermal condition of the feed
D. Relative volatility
Related Mcqs:
- Absorption factor is defined as (where, S1 = slope of the operating line S2 = slope of the equilibrium curve) ____________________?
A. S2/S1
B. S1/S2
C. S1 – S2
D. S1 × S2 - The slope of 9-line is determined by the______________________?
A. Reflux ratio
B. Plate efficiency to be achieved
C. Thermal condition of the feed
D. Relative volatility - On moving the feed line (q-line) from saturated liquid feed (vertical position) to saturated vapor feed (horizontal feed), if the slope of both the operating lines are to be increased, then it will result in______________________?
A. Greater degree of separation with a fixed number of trays
B. Increased reboiler load
C. Increased reflux ratio
D. None of these - The slope of the operating line for a single component co-current absorber when plotted in terms of mole ratio units is__________________?
A. 0
B. ∞
C. -ve
D. +ve - The individual mass transfer co-efficients (moles/m2s) for absorption of a solute from a gas mixture into a liquid solvent are, KL = 4.5 and KG = 1.5. The slope of the equilibrium line is 3. Which of the following resistance (s) is (are) controlling ?
A. Liquid side
B. Gas side
C. Interfacial
D. Both liquid and gas side - In a binary distillation column, if the feed contains 40 mole % vapour, the q line will have a slope of_________________?
A. 1.5
B. -0.6
C. -1.5
D. 0.6 - When both the fluids flow concurrently in an absorber, the slope of the operating line is____________________?
A. -ve
B. +ve
C. 1
D. -1 - If f = moles of vapour present per mole of feed, then the slope of feed line is (McCabe- Thiele method) ________________________?
A. (1 – f)/f
B. – (f – 1)/f
C. -1/f
D. -f/(1 – f) - The absorption factor is defined as (where, L = liquid flow rate, G = gas flow rate and, m = slope of the equilibrium line) ?
A. L/mG
B. G/mL
C. mL/G
D. LG/m - If G = insoluble gas in gas stream and L = non-volatile solvent in liquid stream, then the slope of the operating line for the absorber is___________________?
A. L/G
B. G/L
C. Always < 1
D. None of these