A. Vapour laden gas at 1 atm. and room temperature
B. Gas plus its accompanying vapour at 1 atm. and room temperature
C. Gas plus its accompanying vapour at 1 atm. and gas temperature
D. Vapour laden gas at 1 atm. and gas temperature
Related Mcqs:
- The humid volume may be increased by increasing the____________________?
A. Temperature at constant humidity
B. Humidity at constant temperature
C. Both A. and B.
D. Neither A. nor B. - Humid volume, at a given temperature is a/an _______________ function of humidity?
A. Inverse
B. Exponential
C. Linear
D. Logarithmic - If the specific heats of a gas and a vapor are 0.2KJ/Kg.°K and 1.5 KJ/Kg.°K respectively, and the humidity is 0.01; the humid heat in KJ/°Kg. is________________?
A. 0.31
B. 0.107
C. 0.017
D. 0.215 - Weight of 1 m3 of humid air as compared to 1 m3 of dry air, under the same conditions, is_________________?
A. Less
B. More
C. Same
D. Unpredictable - The mass transfer co-efficient for a solid sphere of radius ‘a’ dissolving in a large volume of quiescent liquid, in which „D’ is the diffusivity of solute, is _____________________?
A. D/a
B. D/2a
C. Proportional to √D
D. Dependent on the Reynolds number - A solid is being dried in the linear drying rate regime from moisture content Xo to XF. The drying rate is zero at X = 0 and the critical moisture content is the same as the initial moisture Xo. The drying time for M = (Ls/ARc) is (where, L = total mass of dry solid, A = total surface area for drying Rc = Constant maximum drying rate per unit area X = moisture content (in mass of water/mass of dry solids)) ?
A. M(Xo – XF)
B. M(Xo/XF)
C. M ln(Xo/XF)
D. MXo ln(Xo/XF) - A solid is being dried in the linear drying rate regime from moisture content Xo to XF. The drying rate is zero at X = 0 and the critical moisture content is the same as the initial moisture Xo. The drying time for M = (Ls/ARc) is (where, L = total mass of dry solid, A = total surface area for drying Rc = Constant maximum drying rate per unit area X = moisture content (in mass of water/mass of dry solids))_____________?
A. M(Xo – XF)
B. M(Xo/XF)
C. M ln(Xo/XF)
D. MXo ln(Xo/XF) - With increase in temperature, the leaching rate increases because of the _____________________?
A. Increased diffusivity
B. Decreased viscosity of liquid
C. Both A. and B.
D. Neither A. nor B. - Diameter of raschig rings used in packed tower in industry is normally around _____________________ inches?
A. 2
B. 8
C. 12
D. 18 - Penetration model (theory) for mass transfer was enunciated by _____________________?
A. Danckwerts
B. Toor and Marcello
C. Higbie
D. Kissinevskii
