Related Mcqs:

1. A solid is being dried in the linear drying rate regime from moisture content Xo to XF. The drying rate is zero at X = 0 and the critical moisture content is the same as the initial moisture Xo. The drying time for M = (Ls/ARc) is (where, L = total mass of dry solid, A = total surface area for drying Rc = Constant maximum drying rate per unit area X = moisture content (in mass of water/mass of dry solids))_____________?

   A. M(Xo – XF)
   B. M(Xo/XF)
   C. M ln(Xo/XF)
   D. MXo ln(Xo/XF)

2. It takes 6 hours to dry a wet solid from 50% moisture content to the critical moisture content of 15%. How much longer it will take to dry the solid to 10% moisture content, under the same drying conditions? (The equilibrium moisture content of the solid is 5%) ?

   A. 15 min
   B. 51 min
   C. 71 min
   D. 94 min

3. A 25 cm × 25 cm × 1 cm flat sheet weighing 1.2 kg initially was dried from both sides under constant drying rate conditions. It took 1500 seconds for the weight of the sheet to reduce to 1.05 kg. Another 1m × 1m × 1cm flat sheet of the same material is to be dried from one side only. Under the same constant drying rate conditions, the time required for drying (in seconds) from its initial weight of 19.2 kg to 17.6 kg is ____________________?

   A. 1000
   B. 1500
   C. 2000
   D. 2500

4. The drying time between fixed moisture content within diffusion controlled ‘falling rate period’ is proportional to (assuming that drying occurs from all surfaces of the solid) (where, T = thickness of the solid) ?

   A. √T
   B. T
   C. T2
   D. T3

5. The drying time between fixed moisture content within diffusion controlled ‘falling rate period’ is proportional to (assuming that drying occurs from all surfaces of the solid) (where, T = thickness of the solid) ?

   A. √T
   B. T
   C. T2
   D. T3

6. The drying time between fixed moisture contents within the ‘constant rate period’ is proportional to (assuming that drying occurs from all surfaces of the solid) (where, T = thickness of the solid) ?

   A. √T
   B. T
   C. T1.5
   D. T3

7. At equilibrium the concentration of water in vapour phase (C*) in kg/m3 of air space and the amount of water (m) adsorbed per kg of dry silica gel are related by, C* = 0.0667m. To maintain dry conditions in a room of air space 100m3 containing 2.2 kg of water vapour initially, 10 kg of dry silica gel is kept in the room. The fraction of initial water remaining in the air space after a long time (during which the temperature is maintained constant) is_________________?

   A. 0.0
   B. 0.2
   C. 0.4
   D. 1.0

8. During constant rate drying period, vaporisation rate per unit drying surface area _____________________?

   A. Decreases with time
   B. Increases with time
   C. Does not change with time
   D. Does not affect the moisture content of the wet solid

9. Equilibrium moisture of a solid is equal to the total moisture minus free moisture. Which of the following substances will have maxi-mum equilibrium moisture ?

   A. Anthracite coal
   B. Rag paper
   C. Bamboo
   D. Inorganic solids

10. Drying of a wet solid under constant drying conditions means the exposure of the wet solid to the air of constant______________________?

    A. Humidity
    B. Velocity
    C. Temperature
    D. All A., B. & C.