A. 150
B. 1500
C. 3500
D. 5000
Related Mcqs:
- Lurgi gasifier (high pressure gasifier) as compared to Kopper Totzek gasifier (atmospheric pressure gasifier) produces __________________?
A. Higher amount of methane
B. Lower amount of hydrogen
C. Both A. and B.
D. Higher amount of both methane and hydrogen - A coal gasifier operating at 20 atm. (e.g. Lurgi gasifier) as compared to one operating at atmospheric pressure (e.g. Kopper-Totzek or Winkler gasifier) will produce a gas having _____________________?
A. Higher methane content and thus higher calorific value
B. Higher carbon monoxide content
C. Lower carbon dioxide content
D. None of these - Kopper-Totzek coal gasifier (installed in a coal based nitrogeneous fertiliser plant) employs a/an ______________ bed gasifier?
A. Entrained
B. Moving
C. Fixed
D. Fluidised - Yield of coke oven gas in low temperature carbonisation of coal is about ______________ Nm3 /ton of dry coal?
A. 60
B. 160
C. 500
D. 750 - Kopper-Totzek coal gasifier_________________?
A. Can give ammonia synthesis gas (H2 + N2)
B. Is a moving bed reactor
C. Cannot use coking coal
D. Operate at very high pressure - Quantity of coke oven gas produced by high temperature carbonisation of one ton of dry coal may be around ______________ Nm3?
A. 30
B. 300
C. 3,000
D. 30,000 - Yield of blast furnace gas is about _______________ Nm3 /ton of pig iron?
A. 300
B. 2000
C. 5000
D. 10000 - Ash content in the coke produced from a coking coal having 20% ash may be around _____________ percent?
A. 6
B. 12
C. 18
D. 24 - Fusion point of coal ash generally varies from 1000 to 1700° C. Ash having fusion point less than _______________ °C is liable to form clinker?
A. 1100
B. 1250
C. 1350
D. 1400 - Dust content in raw blast furnace gas is about _______________ gm/Nm3; hence it is cleaned to the dust level of about < 10 mg /Nm3 before use?
A. 15-30
B. 1-2
C. 70-100
D. 150-200
