The peripheral velocity at inlet of a centrifugal pump having inlet diameter of 25 cms and rotating at 950 rpm is __________ m/sec?

Related Mcqs:

1. The variable required to be known in correlations used for estimating the horse power of a centrifugal gas compressor and hence its cost is P. Inlet pressure Q. Compressor rpm R. Delivery pressure S. Volumetric flow rate at inlet ?

   A. P, Q and R
   B. P and R
   C. R and S
   D. P, Rand S

2. Which is the correct relationship for a centrifugal pump? (Where, D = Impeller diameter, inches H = Head developed, ft of liquid pumped N = Speed of pump, rpm) ?

   A. D = 1840 H0.5/N
   B. D = 1840 N/H0.5
   C. H = 1840 D0.5/N
   D. D = 1840 H/N

3. A fluid (μ/ρ) = 0.01 cm2/sec is moving at critical flow condition (NRe = 2100) through a pipe of dia 3 cms. Velocity of flow is _______________ cm/sec?

   A. 7
   B. 700
   C. 7000
   D. 630

4. Consider a centrifugal pump having a specific impeller diameter, fixed impeller speed pumping a liquid of constant density at a particular discharge capacity. With decrease in the capacity of the pump, the _______________ decreases?

   A. NPSH required
   B. BHP required by the pump
   C. Head of the liquid pumped
   D. All A., B. and C.

5. A centrifugal pump is used to pump water through a horizontal distance of 150 m, and then raised to an overhead tank 10 m above. The pipe is smooth with an I.D of 50 mm. What head (m of water) must the pump generate at its exit E. to deliver water at a flow rate of 0.001 m3/s? The Fanning friction factor, f is 0.0062 ?

   A. 10 m
   B. 11 m
   C. 11.8 m
   D. 30 m

6. A centrifugal pump used to pump water is used to pump an oil with specific gravity of 0.8 at the same rate. The power consumption will now_________________?

   A. Increase
   B. Decrease
   C. Remain same
   D. Data insufficient to predict

7. A centrifugal pump designed to pump water is employed to pump a more viscous oil. In the later case, the pump_________________?

   A. Develops a lower head
   B. Capacity is reduced
   C. Requires more power
   D. All A., B. and C.

8. A centrifugal pump has the following specifications: Power = 4 H.P.; Speed = 800 rpm Head = 8 metres Flow = 1000 litres/minutes. If its speed is halved, the new discharge will be __________ litres/minute ?

   A. 500
   B. 200
   C. 1000
   D. 750

9. A centrifugal pump has the following specifications: Power = 4 H.P.; Speed = 800 rpm Head = 8 metres Flow = 1000 litres/minutes. If its speed is halved, then the new head will be ______________ metres?

   A. 2
   B. 4
   C. 8
   D. 5.5

10. A centrifugal pump has the following specifications: Power = 4 H.P.; Speed = 800 rpm Head = 8 metres Flow = 1000 litres/minutes. If its speed is halved, the power consumed now will be _____________ hp?

    A. 0.5
    B. 2
    C. 4
    D. 1