A. Vane
B. Piston
C. Centrifugal
D. Plunger
Related Mcqs:
- Which is the correct relationship for a centrifugal pump? (Where, D = Impeller diameter, inches H = Head developed, ft of liquid pumped N = Speed of pump, rpm) ?
A. D = 1840 H0.5/N
B. D = 1840 N/H0.5
C. H = 1840 D0.5/N
D. D = 1840 H/N - A liquid is pumped at the rate of 600 litres using 1000 rpm. If the rpm is changed to 1100, the liquid pumped is _____________ litres?
A. 600
B. 660
C. 1.1
D. 60 - A centrifugal pump used to pump water is used to pump an oil with specific gravity of 0.8 at the same rate. The power consumption will now_________________?
A. Increase
B. Decrease
C. Remain same
D. Data insufficient to predict - A centrifugal pump designed to pump water is employed to pump a more viscous oil. In the later case, the pump_________________?
A. Develops a lower head
B. Capacity is reduced
C. Requires more power
D. All A., B. and C. - A centrifugal pump is used to pump water through a horizontal distance of 150 m, and then raised to an overhead tank 10 m above. The pipe is smooth with an I.D of 50 mm. What head (m of water) must the pump generate at its exit E. to deliver water at a flow rate of 0.001 m3/s? The Fanning friction factor, f is 0.0062 ?
A. 10 m
B. 11 m
C. 11.8 m
D. 30 m - Slurries can be most conveniently pumped by a _______________ pump?
A. Screw
B. Reciprocating
C. Gear
D. Centrifugal - A particle A of diameter 10 microns settles in an oil of specific gravity 0.9 and viscosity 10 poise under Stoke’s law. A particle B with diameter 20 microns settling in the same oil will have a settling velocity ?
A. Same as that of A
B. One fourth as that of A
C. Twice as that of A
D. Four times as that of A - Low specific speed of a pump implies that, it is a/an ______________ pump?
A. Axial flow
B. Centrifugal
C. Mixed flow
D. None of these - Draining of shallow pits or sump is done by a sump pump, which is a ______________ pump?
A. Single stage vertical
B. Centrifugal
C. Plunger
D. Diffuser - Boiler feed water pump is usually a ______________ pump?
A. Reciprocating
B. Gear
C. Multistage centrifugal
D. Diaphragm