A. Avoid priming, every time we start the pump
B. Remove the contaminant present in the liquid
C. Minimise the fluctuation in discharge
D. Control the liquid discharge
Related Mcqs:
- Foot valves provided in pumps are ____________ valves?
A. Relief
B. Three/four way
C. Pressure reducing
D. Directional control - In centrifugal pump operation, the cavitation can be eliminated by maintaining suction pressure ______________ the vapor pressure of the liquid at the suction temperature?
A. Lower than
B. Higher than
C. Equal to
D. None of these - A centrifugal pump is used to pump water through a horizontal distance of 150 m, and then raised to an overhead tank 10 m above. The pipe is smooth with an I.D of 50 mm. What head (m of water) must the pump generate at its exit E. to deliver water at a flow rate of 0.001 m3/s? The Fanning friction factor, f is 0.0062 ?
A. 10 m
B. 11 m
C. 11.8 m
D. 30 m - A centrifugal pump used to pump water is used to pump an oil with specific gravity of 0.8 at the same rate. The power consumption will now_________________?
A. Increase
B. Decrease
C. Remain same
D. Data insufficient to predict - A centrifugal pump designed to pump water is employed to pump a more viscous oil. In the later case, the pump_________________?
A. Develops a lower head
B. Capacity is reduced
C. Requires more power
D. All A., B. and C. - Cavitation occurs in a centrifugal pump when the suction pressure is________________?
A. Less than the vapour pressure of the liquid at that temperature
B. Greater than the vapour pressure of the liquid at that temperature
C. Equal to the vapour pressure
D. Equal to the developed head - If the discharge of a centrifugal pump is throttled, then its suction lift_______________________?
A. Increases
B. Decreases
C. Remains unchanged
D. Data insufficient to predict - Maximum theoretical suction lift for water at 15°C by a centrifugal pump is 34 ft. The same for water at 90°C will be _____________________ ft?
A. 40
B. 34
C. 8
D. 37 - The net positive suction head (NPSH) of a centrifugal pump is defined as the sum of the velocity head and the pressure head at the_________________?
A. Discharge
B. Suction
C. Suction minus vapor pressure of the liquid at suction temperature
D. Discharge minus vapor pressure of the liquid at the discharge temperature - Net positive suction head (NPSH) of a centrifugal pump must be____________________?
A. Greater than the vapour pressure of the liquid
B. Less than the vapour pressure of the liquid
C. Equal to the vapour pressure of the liquid
D. Less than barometric pressure
