Enthalpy change resulting, when unit mass of solid is wetted with sufficient liquid, so that further addition of liquid produces no additional thermal effect, is called the heat of________________?

Related Mcqs:

1. Enthalpy of formation of NH3 is – 46 kJ/kg mole. The enthalpy change for the gaseous reaction, 2NH3 → N2 + 3H2, is equal to _____________ kJ/kg. mole?

   A. 46
   B. 92
   C. -23
   D. -92

2. High pressure steam is expanded adiabatically and reversibly through a well insulated turbine, which produces some shaft work. If the enthalpy change and entropy change across the turbine are represented by ΔH and ΔS respectively for this process ?

   A. Δ H = 0 and ΔS = 0
   B. Δ H ≠ 0 and ΔS = 0
   C. Δ H ≠ 0 and ΔS ≠ 0
   D. Δ H = 0 and ΔS ≠ 0

3. The following heat engine produces power of 100,000 kW. The heat engine operates between 800 K and 300 K. It has a thermal efficiency equal to 50% of that of the Carnot engine for the same temperature. The rate at which heat is absorbed from the hot reservoir is____________________?

   A. 100,000 kW
   B. 160,000 kW
   C. 200,000 kW
   D. 320,000 kW

4. A solid metallic block weighing 5 kg has an initial temperature of 500°C. 40 kg of water initially at 25°C is contained in a perfectly insulated tank. The metallic block is brought into contact with water. Both of them come to equilibrium. Specific heat of block material is 0.4 kJ.kg-1. K-1. Ignoring the effect of expansion and contraction and also the heat capacity to tank, the total entropy change in kJ.kg-1, K-1 is_________________?

   A. -1.87
   B. 0
   C. 1.26
   D. 3.91

5. Those solutions in which there is no volume change upon mixing the components in the liquid state and which, when diluted do not undergo any heat change (i.e. heat of dilution is zero), are called ____________ solutions?

   A. Ideal
   B. Real
   C. Isotonic
   D. None of these

6. The enthalpy change when ammonia gas is dissolved in water is called the heat of___________________?

   A. Solution
   B. Formation
   C. Dilution
   D. Combustion

7. Entropy change of the reaction, H2O (liquid) → H2O (gas), is termed as the enthalpy of___________________?

   A. Solution
   B. Vaporisation
   C. Formation
   D. Sublimation

8. The partial molar enthalpy of a component in an ideal binary gas mixture of composition Z, at a temperature T and pressure P, is a function only of________________?

   A. T
   B. T and P
   C. T, P and Z
   D. T and Z

9. “The heat capacity of a solid compound is approximately equal to the sum of the heat capacities of the constituent elements.” This is the statement of___________________?

   A. Law of Petit and Dulong
   B. Kopp’s rule
   C. Nernst heat theorem
   D. Trouton’s rule

10. In fluid flow, and heat and mass transfer, one encounters (i) kinematic velocity (μ), (ii) molecular diffusivity (ζ) and thermal diffusivity (α). The units of these quantities are ?

    A. μ , α and θ all have units of m/s
    B. μ , α and θ all have units of m2/s
    C. α and θ have units of m2/s, while μ has unit of m/s
    D. α and θ have units of m/s, while μ has unit of m2/s