A. Concentrated H2SO4
B. Sulphurous acid
C. Oleum
D. None of these
Related Mcqs:
- Sulphuric acid completely saturated with sulphur trioxide is called_________________?
A. Concentrated sulphuric acid
B. Oleum
C. Sulphurous acid
D. Dilute sulphuric acid - In multistage equilibrium conversion of SO2 to SO3 (2SO2 + O2 ⇌ 2SO3), the reverse reaction becomes appreciable at a temperature of 550° C. The percentage equilibrium conversion of SO2 to SO3 can be increased by ?
A. Increasing the oxygen concentration
B. Putting more quantity of V2O5 catalyst in the converter
C. Removing some quantity of SO3 during intermediate stage
D. Maintaining low temperature & pressure in the converter - In the manufacture of sulphuric acid from elemental sulphur, the following sequence of major operations is followed ?
A. Furnace → converter → absorber
B. Furnace → evaporator → absorber
C. Furnace → converter → evaporator
D. Converter → furnace → absorber - Contact process of sulphuric acid manufacture ____________________?
A. Yields acid of higher concentration than chamber process
B. Yields acids of lower concentration than chamber process
C. Is obsolete
D. Eliminates absorber - Platinum catalyst used in the earlier days of sulphuric acid manufacture by contact process suffers from the drawback like_________________?
A. High cost
B. Fragile nature
C. Easy poisoning tendency
D. All A, B. and C. - Catalyst used in the manufacture of sulphuric acid by chamber & contact processes are respectively ?
A. V2O5 & Cr2O3.
B. Oxides of nitrogen & Cr2O3
C. V2O5 on a porous carrier & oxides of nitrogen
D. Oxides of nitrogen & V2O5 on a porous carrier - Sulphuric acid solution having a specific gravity of 1.20 at room temperature is used mainly for the_______________?
A. Fertiliser manufacture
B. Car battery solution
C. Synthesis of oleum
D. Water treatment - During the manufacture of sulphuric acid, the temperature of molten sulphur is not increased beyond 160°C, as_______________________?
A. It is very corrosive at elevated temperature
B. Its viscosity is not reduced on further heating (hence pressure drop on pumping it, cannot be
further reduced)
C. It decomposes on further increasing the temperature
D. None of these - Sulphuric acid is mainly used in the _______________ industry ?
A. Fertiliser
B. Steel
C. Paper
D. Paint - In contact process, SO3 is absorbed in 97% H2SO4 and not in water, because___________________?
A. SO3 gas is sparingly soluble in water
B. Water forms an acid mist, which is difficult to absorb
C. The purity of acid is affected
D. Scale formation in the absorber is to be avoided
