A. Iron-steam reaction
B. Electrolysis of water
C. Steam reforming of naphtha
D. Its cryogenic separation from coke oven gas
Related Mcqs:
- Nitro-glycerine absorbed in wood flour, sodium nitrate or ammonium nitrate is commercially used as controlled explosive called dynamite. The raw material used for its manufacture are glycerine, nitric acid and___________________?
A. Sulphuric acid
B. Phosphoric acid
C. Hydrochloric acid
D. Hydrofluoric acid - Styrene (a monomer for the production of polystyrene) is commercially produced by ____________________?
A. Catalytic dehydrogenation of ethyl benzene
B. Dehydration of ethyl alcohol followed by hydrogenation
C. Reacting ethylene oxide with acetaldehyde
D. Fermentation of starch - Commercially ethylene is produced from naphtha by ______________________?
A. Catalytic cracking
B. Catalytic dehydrogenation
C. Pyrolysis
D. Hydrocracking - Which of the following is not produced commercially from sea water ?
A. Magnesium & potassium compounds
B. Common salt
C. Bromine
D. Iodine - Bleaching powder (chemically known as calcium chloro hypochlorite) is commercially produced by the action of chlorine on ____________________?
A. Slaked lime
B. Soda lime
C. Calcium perchlorate
D. None of these - Alum is commercially produced from___________________?
A. Gypsum
B. Feldspar
C. Galena
D. Bauxite - P.T.F.E. (Poly tetra fluoro ethylene) is commercially known as____________________?
A. Bakelite
B. Neoprene
C. Teflon
D. Nylon-66 - Polycaprolactam is commercially known as___________________?
A. Nylon-6
B. Nylon-66
C. Dacron
D. Rayon - Caprolactam (a raw material for nylon-6 manufacture) is produced from ___________________?
A. Phenol
B. Naphthalene
C. Benzene
D. Pyridine - Most easily and cheaply available fibrous raw material for paper manufacture available in India is bamboo. The yield of pulp produced from fibrous raw material by mechanical process is about _____________ percent?
A. 75
B. < 10
C. > 30
D. 50
