A. 0.5
B. 1
C. 1/3
D. 2.5
Related Mcqs:
- While the oxy-acetylene flame produces a temperature of 3200°C, the temperature produced by oxy-hydrogen flame is about _____________ °C ?
A. 1800
B. 2000
C. 2400
D. 3000 - Projection welding & stud welding is categorised as the _______________ welding?
A. Pressure
B. Thermit
C. Resistance
D. Arc - Thermit welding is categorised as the ______________________ welding ?
A. Forge
B. Fusion
C. Resistance
D. Arc - Air/fuel ratio on molar (volume) basis for combustion of methane with theoretical quantity of air with be________________?
A. 9.5 : 1
B. 12.5 : 1
C. 15.5 : 1
D. 18.5 : 1 - Oxygen cylinders used for autogenous (cutting/welding) purposes are ___________________?
A. Seamless & made of steel
B. Heat treated before use
C. Made by sand casting
D. Welded steel cylinders - Air/fuel ratio by weight for combustion of methane with theoretical quantity of air will be about ____________________?
A. 9 : 1
B. 17 : 1
C. 23 : 1
D. 29 : 1 - For which pair of the fuel gases, calorific value (C.V.) of one fuel is almost double that of the other on volume basis (i.e., kcal/Nm3) while the C.V. is same on weight basis (i.e., kcal/kg) ?
A. Propane and acetylene
B. Propane and LPG
C. Sewage gas and gobar gas
D. B.F gas and coke oven gas - Chromium molybdenum steel cannot be welded using ______________ welding ?
A. Thermit
B. Electrical resistance
C. Oxy-acetylene
D. Any of these - Melting point & boiling points of liquid oxygen are respectively – 218.8°C & – 183°C, while the same for liquid nitrogen is – 210°C & – 195.8°C respectively. The difference in melting points of liquid oxygen & liquid nitrogen is not equal to 8.8 ?
A. °C
B. °F
C. °K
D. °R - The excess air required for the combustion of pulverized coal is of the order of about _______________ percent ?
A. 5
B. 15
C. 30
D. 45
Mcq Added by: admin
