A. y2 = 2k1t + k2
B. y = k1 ln (k2t + k3)
C. y = k1 t + k2
D. y = k1t3 + k2
Related Mcqs:
- _____________ is the process of coating the surface of steel with aluminium oxide, thereby imparting it increased resistance to corrosion & oxidation upto a temperature of 700°C ?
A. Veneering
B. Galvanising
C. Electroplating
D. Calorising - A furnace is made of a refractory brick wall of thickness 0.5 metre and thermal conductivity 0.7 W/m.°K For the same temperature drop and heat loss, this refractory wall can be replaced by a layer of diatomaceous earth of thermal conductivity 0.14 W/m.K and thickness ______________ metre?
A. 0.01
B. 0.1
C. 0.25
D. 0.5 - Which of the following materials does not form adherent oxide film on surface ?
A. Copper
B. Nickel
C. Aluminium
D. Gold & silver - Out of the following, maximum temperature drop for a given heat flow & for the same thickness will be in the case of________________?
A. Steel
B. Glass wood
C. Copper
D. Fireclay bricks - In case of water (Prandtl number ≈ 6) flowing over a flat plate heated over the entire length, the thermal boundary layer thickness as compared to hydrodynamic boundary layer thickness is ?
A. Less
B. More
C. Equal
D. Unpredictable - The laminar boundary layer thickness in zero pressure gradient flow over a flat plate along the x-direction varies as x0.5 while the thickness of turbulent boundary layer varies as (where, x = distance from the leading edge) ?
A. x1.5
B. x0.8
C. x-1.5
D. x-0.8 - _______________ is the hardest oxide and is hence used where high wear resistance at high temperature is required?
A. Beryllium
B. Zirconia
C. Alumina
D. Magnesia - Which of the following relationships is correct for relating the three elastic constants of an isotropic elastic material (where, E = Young’s modulus, G = Modulus of rigidity or shear modulus v = Poisson’s ratio) ?
A. E = 2G (1 + v)
B. E = G (1 + v)
C. E = G (1 + v)/2
D. E = 2G (1 + 2v) - In troposphere (the weather domain), the temperature ‘t’ at height ‘h’ above the sea level in metres is given by (where, temperature at sea level is 15°C and t is in °C.) ?
A. t = 15 – 0.0065 h
B. t = 15 + 0.0065 h
C. t = 0.0035 h – 15
D. t = 15 – 0.0035 h - The boiling & freezing points on a newly defined temperature scale in degree ‘D’ are 400°D & 100°D respectively. The temperature reading corresponding to 60°C on this new temperature scale will be equal to _____________ °D ?
A. 140
B. 180
C. 240
D. 280
