A. Sequence of operation to be performed
B. Progress of work performed
C. Authorisation of work to be performed
D. Balancing of load on machines
Related Mcqs:
- Colour comparator is used to measure the___________________?
A. pH value
B. Electrode potential
C. Colour intensity
D. None of these - A reduction in thermal resistance during heat transfer does not occur in the___________________?
A. Convection heat transfer by stirring the fluid and cleaning the heating surface
B. Conduction heat transfer by reduction in the material thickness and increase in the thermal
conductivity
C. Radiation heat transfer by increasing the temperature and reducing the emissivity
D. None of these - The mechanism which changes the value of manipulated variable in response to the output signal from the control unit is called the___________________?
A. Final control element
B. On-off control
C. Floating control action
D. None of these - The difference between gross & net calorific values of fuel is due to the___________________?
A. Sensible heat carried away by the flue gases
B. Heat carried away by the steam from the moisture content of the fuel
C. Heat lost by radiation
D. Heat carried away by steam from the combustion of hydrogen in the fuel - Cold cracking in the heat affected zone of a high strength steel weld can take place because of the___________________?
A. Retained austenite
B. Martensite formation
C. Relatively high sulphur content in the base metal
D. Sufficient hydrogen present in the welding arc - Transition from laminar flow to turbulent flow in fluid flow through a pipe does not depend upon the___________________?
A. Length of the pipe
B. Diameter of the pipe
C. Density of the fluid
D. Velocity of the fluid - Most important property of steels for use in automobile bodies is the___________________?
A. Formability
B. Yield strength
C. Toughness
D. Resilience - Batch process is preferred over continuous process, when the___________________?
A. Product yields and quality cannot be achieved in continuous process, because of long
residence time
B. Sales demand of product is not steady
C. Same equipment cannot be used for several processes of the same nature
D. All (A), B. & (C) - ‘Cryogenics’ is concerned with the generation & use of low temperature in the range of____________________?
A. 0°K to 123°K
B. 0°C to – 123°C
C. 0°C to – 273°C
D. 0°K to 273°K - Production of a hollow product by inflation of a tube or parison is called the _______________ process?
A. Blow moulding
B. Calendaring
C. Extrusion
D. Injection
