A. 0°
B. 32°
C. 62°
D. 212°
Related Mcqs:
- According to thermodynamic Fahrenheit scale, the fundamental interval between ice point to steam point is__________________?
A. 180°
B. 212°
C. 32°
D. 273° - The boiling & freezing points on a newly defined temperature scale in degree ‘D’ are 400°D & 100°D respectively. The temperature reading corresponding to 60°C on this new temperature scale will be equal to _____________ °D ?
A. 140
B. 180
C. 240
D. 280 - Fahrenheit and Centigrade scales have the same readings at _____________________?
A. -55°
B. -40°
C. -33°
D. -58° - The atmospheric temperature during melting of ice/snow (in the atmosphere)_________________?
A. Decreases
B. Increases
C. Remain same
D. May increase or decrease; depends on the altitude where snow melts - Heating the Hypo-eutectoid steels to 30°C above the upper critical temperature line, soaking at that temperature and then cooling slowly to the room temperature to form a pearlite & ferrite structure is called_______________________?
A. Tempering
B. Hardening
C. Annealing
D. Normalising - The ratio of thermal & electrical conductivity is same for all the metals at the same temperature; and at around room temperature, this ratio is proportional to(where, T = absolute temperature, °K) ?
A. T
B. 1/T
C. T2
D. 1/T2 - The cooling rate required to freeze 1 ton of water at 0°C into ice at 0°C in 24 hours is ______________ BTU/hr?
A. 100
B. 200
C. 1000
D. 2000 - For infinite parallel planes having emissivities ε1 & ε2, the interchange factor for radiation from surface 1 to surface 2 is given by__________________?
A. (ε1 + ε2)/ε1.ε2
B. ε1.ε2/(ε1 + ε2 – ε1.ε2)
C. ε1.ε2
D. ε1 + ε2 - Wrought iron is never shaped by__________________?
A. Casting
B. Cold working
C. Forging
D. Welding - The minimum temperature to which the water can be cooled in a cooling tower is the ______________ temperature of air?
A. Ambient
B. Dry bulb
C. Dew point
D. Wet bulb
