A. Not changed
B. Decreasing
C. Increasing
D. Data sufficient, can’t be predicted
Related Mcqs:
- The following heat engine produces power of 100,000 kW. The heat engine operates between 800 K and 300 K. It has a thermal efficiency equal to 50% of that of the Carnot engine for the same temperature. The rate at which heat is absorbed from the hot reservoir is____________________?
A. 100,000 kW
B. 160,000 kW
C. 200,000 kW
D. 320,000 kW - Steam undergoes isentropic expansion in a turbine from 5000 kPa and 400°C (entropy = 6.65 kJ/kg K) to 150 kPa) (entropy of saturated liquid = 1.4336 kJ/kg. K, entropy of saturated vapour = 7.2234 kJ/kg. K) The exit condition of steam is_______________?
A. Superheated vapour
B. Partially condensed vapour with quality of 0.9
C. Saturated vapour
D. Partially condensed vapour with quality of 0.1 - A solid metallic block weighing 5 kg has an initial temperature of 500°C. 40 kg of water initially at 25°C is contained in a perfectly insulated tank. The metallic block is brought into contact with water. Both of them come to equilibrium. Specific heat of block material is 0.4 kJ.kg-1. K-1. Ignoring the effect of expansion and contraction and also the heat capacity to tank, the total entropy change in kJ.kg-1, K-1 is_________________?
A. -1.87
B. 0
C. 1.26
D. 3.91 - A cyclic engine exchanges heat with two reservoirs maintained at 100 and 300°C respectively. The maximum work (in J) that can be obtained from 1000 J of heat extracted from the hot reservoir is_________________?
A. 349
B. 651
C. 667
D. 1000 - The efficiency of a Carnot heat engine operating between absolute temperatures T1 and T2 (when, T1 > T2) is given by (T1 – T2)/T1. The co-efficient of performance (C.O.P.) of a Carnot heat pump operating between T1 and T2 is given by__________________?
A. T1/(T1-T2)
B. T2/(T1-T2)
C. T1/T2
D. T2/R1 - During a reversible isothermal expansion of an ideal gas, the entropy change is_________________?
A. +ve
B. 0
C. -ve
D. ∞ - The entropy change in a reversible isothermal process, when an ideal gas expands to four times its initial volume is_________________?
A. R loge 4
B. R log10 4
C. Cv log10 4
D. Cv loge 4 - High pressure steam is expanded adiabatically and reversibly through a well insulated turbine, which produces some shaft work. If the enthalpy change and entropy change across the turbine are represented by ΔH and ΔS respectively for this process ?
A. Δ H = 0 and ΔS = 0
B. Δ H ≠ 0 and ΔS = 0
C. Δ H ≠ 0 and ΔS ≠ 0
D. Δ H = 0 and ΔS ≠ 0 - The chemical potential of a component (μi) of a phase is the amount by which its capacity for doing all work, barring work of expansion is increased per unit amount of substance added for an infinitesimal addition at constant temperature and pressure. It is given by_________________?
A. (∂E/∂ni)S, v, nj
B. (∂G/∂ni)T, P, nj = (∂A/∂ni) T, v, nj
C. (∂H/∂ni)S, P, nj
D. All (A), B. and (C) - The efficiency of an Otto engine compared to that of a diesel engine, for the same compression ratio will be _______________?
A. More
B. Less
C. Same
D. Data insufficient to predict
Advertisement