A. stronger
B. weaker
C. equally strong
D. any of the above
0
Efficiency of a riveted joint, having the minimum pitch as per IS : 800, is_________________?
0
Bolts are most suitable to carry_________________?
A. 40%
B. 50%
C. 60%
D. 70%
0
When the bolts are subjected to reversal of stresses, the most suitable type of bolt is________________?
A. shear
B. bending
C. axial tension
D. shear and bending
0
The effective length of a fillet weld should not be less than___________________?
A. black bolt
B. ordinary unfinished bolt
C. turned and fitted bolt
D. high strength bolt
0
A butt weld is specified by__________________?
A. two times the weld size
B. four times the weld size
C. six times the weld size
D. weld size
0
The slenderness ratio of a column supported throughout its length by a masonry wall is________________?
A. effective throat thickness
B. plate thickness
C. size of weld
D. penetration thickness
0
The effective length of a battened strut effectively held in position at both ends but not restrained in direction is taken as________________?
A. zero
B. 10
C. 100
D. infinity
0
According to IS Specifications, the maximum pitch of rivets in compression is_____________________?
A. 1.8 L
B. L
C. 1.1 L
D. 1.5 L
0
The maximum slenderness ratio of a steel column, the design of which is governed by wind or seismic forces is________________?
A. lesser of 200 mm and 12 t
B. lesser of 200 mm and 161
C. lesser of 300 mm and 32 t
D. lesser of 3 00 mm and 24 t
where t is thickness of thinnest outside plate or angle
Download App