A. Hot wire manometer
B. Hot wire anemometer
C. Barometer
D. All are correct
Related Mcqs:
- The velocity in a large canal or channel measured at a depth of ___________________ gives the mean velocity using the current meter?
A. 0.6m
B. 0.5m
C. 0.6 depth
D. 0.5 depth - Mean velocity of flow in a river can be directly measured by means of ______________________?
A. Dickne’s formula
B. Current meter
C. Surface floats
D. Rod floats - According to Kennedy’s silt theory , the critical velocity is directly proportional to depth of flow _____________________?
A. D0.64
B. D0.65
C. D0.66
D. D0.67 - A water rise takes place on down stream of sloping glacis, when a stream of water moving with high velocity and low depth strikes another stream of flow moving with low velocity and high depth, such breakage in water surface is called______________?
A. Water wave
B. Water tide
C. Hydraulic jump
D. Afflux - The water vapours are generally present in a atmosphere, some times isolated and sometimes mixed with other gases. in such a situation the pressure exerted by each component of mixture, will be called ______________________?
A. Partial pressure
B. Saturation pressure
C. Vapour pressure
D. All are correct - A fixed reference point from which the discharge of flowing water is measured is________________?
A. Reduce level
B. Bench mark
C. Contour point
D. Reference point - Flow in which each liquid particle has a definite path is called _____________________?
A. Steady flow
B. uniform flow
C. Laminar flow
D. Transitional flow - The flow in the river due to the floods may be classified as _____________________?
A. Laminar flow
B. Stream line flow
C. Irrotational flow
D. Turbulent flow - In alluvial river due to the action of centrifugal force, bends are developed by scouring on concave and silting on convex _____________________?
A. Silting & scouring
B. Meandering
C. Aggrading
D. Degrading - An open cut in the canal bank. with bed and sides to escape canal water through a lead channel to mix water in a nearby drain is called _____________________?
A. Inlet
B. Out let
C. Module
D. Exit