TDAP stands for __________?

Related Mcqs:

1. __________% of total global water is saline and available in oceans ?

   A. 95%
   B. 96%
   C. 97%
   D. 97.5%

2. Specific gravity of a liquid is defined as the ratio of its specific weight to that of pure water and standard temperature and pressure. Therefore specific gravity is equal to ___________________?

   A. 1.0
   B. 1.2
   C. 1.5
   D. 2.0

3. if the depth of water in an open channel is greater than the critical depth, the flow is called________________?

   A. Critical depth
   B. Non-critical flow
   C. Sub-critical flow
   D. Shooting flow

4. An instrument used for measuring pressure head, generally made up of a small pipe tapped into the side of conduit is called ___________________?

   A. Pilot tube
   B. Piezometer
   C. Manometer
   D. All are correct

5. The water force per meter length on a vertical wall is equal to_________________?

   A. w H
   B. W.H/2
   C. WH2 2
   D. wh2

6. A mine or tunnel for collecting seepage water in rock or dam is called ____________________?

   A. Water tunnel
   B. Seepage gallery
   C. Seepage tunnel
   D. Seepage Drain

7. The stability analysis of earth dam founded on cohesion less silt material be made against_____________________?

   A. Shear
   B. Turning
   C. Sinking
   D. Buckling

8. The under sluices in a weir are provided, at the level of upstream floor dispose off the sediment deposited on downstream is called______________________?

   A. Under sluices
   B. Head sluices
   C. Scouring sluices
   D. Sluice gates

9. A module or outlet in which discharge depends upon the difference of head between distributary and the water course is called ___________________?

   A. Non-modular
   B. Modular
   C. Semi-modular
   D. Rigid module

10. The field capacity is the amount of water retained by a saturated soil mass after being acted by gravity. The amount of water required to bring the soil moisture content of that soil up to field capacity is called__________________?

    A. Soil-moisture deficiency
    B. Field-moisture deficiency
    C. Equivalent-moisture deficiency
    D. a and b are correct