A. Above which it will always become damp
B. Below which it will always stay dry
C. Both A. and B.
D. Above Which it will always become dry and below which it will always stay damp
Related Mcqs:
- Humidity chart is useful for the solution of problems concerning condensation, vaporisation and air conditioning. At a given dry bulb temperature, value of humidity obtained from the humidity chart directly, is in terms of _______________ humidity?
A. Molal
B. Relative
C. Percentage
D. None of these - Humidity chart is useful for the solution of problems concerning condensation, vaporisation and air conditioning. At a given dry bulb temperature, value of humidity obtained from the humidity chart directly, is in terms of _______________ humidity?
A. Molal
B. Relative
C. Percentage
D. None of these - The percentage humidity is less than the relative humidity only at __________________ percent humidity?
A. Zero
B. Hundred
C. Both zero and hundred
D. None of these - It takes 6 hours to dry a wet solid from 50% moisture content to the critical moisture content of 15%. How much longer it will take to dry the solid to 10% moisture content, under the same drying conditions? (The equilibrium moisture content of the solid is 5%) ?
A. 15 min
B. 51 min
C. 71 min
D. 94 min - At a fixed pressure, the humidity depends upon the partial pressure of vapor in the mixture. Humidity of a vapour free gas is ________________ percent.?
A. 100
B. 0
C. 50
D. Between 0 and 100 - The relative humidity of air decreases in-spite of an increase in the absolute humidity, when the____________________?
A. Temperature rises
B. Pressure rises
C. Temperature falls
D. Pressure falls - When the ____________________ the relative humidity of air decreases, despite an increase in the absolute humidity?
A. Temperature rises
B. Pressure rises
C. Temperature falls
D. Pressure falls - A solid is being dried in the linear drying rate regime from moisture content Xo to XF. The drying rate is zero at X = 0 and the critical moisture content is the same as the initial moisture Xo. The drying time for M = (Ls/ARc) is (where, L = total mass of dry solid, A = total surface area for drying Rc = Constant maximum drying rate per unit area X = moisture content (in mass of water/mass of dry solids)) ?
A. M(Xo – XF)
B. M(Xo/XF)
C. M ln(Xo/XF)
D. MXo ln(Xo/XF) - A solid is being dried in the linear drying rate regime from moisture content Xo to XF. The drying rate is zero at X = 0 and the critical moisture content is the same as the initial moisture Xo. The drying time for M = (Ls/ARc) is (where, L = total mass of dry solid, A = total surface area for drying Rc = Constant maximum drying rate per unit area X = moisture content (in mass of water/mass of dry solids))_____________?
A. M(Xo – XF)
B. M(Xo/XF)
C. M ln(Xo/XF)
D. MXo ln(Xo/XF) - Drying of a wet solid under constant drying conditions means the exposure of the wet solid to the air of constant____________________?
A. Humidity
B. Velocity
C. Temperature
D. All A., B. & C.
