A. E = 2G (1 + v)
B. E = G (1 + v)
C. E = G (1 + v)/2
D. E = 2G (1 + 2v)
Related Mcqs:
- A highly elastic material is deformed least on loading and retains its original form on removal of the load. Which of the following is the most elastic material ?
A. Steel
B. Glass
C. Rubber
D. Brass - According to maximum shear stress failure criterion, yielding in material occurs, when the maximum shear stress is equal to _______________ times the yield stress ?
A. 0.5
B. 2
C. √2
D. √3/2 - Isotropic materials have the same _______________________ in all directions?
A. Induced stresses
B. Density
C. Elastic properties
D. Thermal properties - In the formation of cermets, the ratio of ceramic material to metallic material is usually 80:20. Which of the following is a cermet ?
A. Zirconia
B. Alumina
C. Bakelite
D. Tungsten carbide - Young’s modulus of a material is the measure of its ___________________?
A. Stiffness
B. Malleability
C. Creep resistance
D. Tensile strength - _______________ test determines the yield strength, Young’s modulus of elasticity, percentage reduction in area & percentage elongation of a material ?
A. Tensile
B. Fatigue
C. Impact
D. None of these - A cylindrical rod subjected to a tensile strain within the elastic limit undergoes a volume change. If the volume strain is equal to half the tensile strain, then the Poisson’s ratio of the rod is___________________?
A. 0
B. 0.33
C. 0.44
D. 0.25 - The thickness of oxide film is y at time t. If K1, K2 and K3 are the temperature dependent constants, the parabolic law of oxidation is given by __________________?
A. y2 = 2k1t + k2
B. y = k1 ln (k2t + k3)
C. y = k1 t + k2
D. y = k1t3 + k2 - The ratio of the shear stress to the principal stress on a principal plane is______________________?
A. 0
B. 1
C. 1/2
D. 1/3 - Two wires of the same radius & material having length in the ratio of 1 : 2 are stretched by the same force. The strain produced in the two wires will be in the ratio of__________________?
A. 1 : 1
B. 1 : 2
C. 2 : 1
D. 1 : 4
