A. 250°C
B. 500°C
C. 1000°C
D. 150CPC
E. 2000°C
Related Mcqs:
- If one cylinder of a diesel engine receives more fuel than the others, then for that cylinder the________________?
A. exhaust will be smoky
B. piston rings would stick into piston grooves
C. exhaust temperature will be high
D. engine starts overheating
E. scavenging occurs - Which of the following medium is compressed in a Diesel engine cylinder __________________?
A. air aione
B. air and fuel
C. air and lub oil
D. fuel alone
E. air, fuel and lub oil - The fuel in diesel engine is normally injected at pressure of_________________?
A. 5-10 kg/cm2
B. 20-25 kg/cm2
C. 60-80 kg/cm2
D. 90-130 kg/cm2
E. 150-250 kg/cm2 - The ratio of useful power; engine friction exhaust gas losses; cooling water, air and oil losses for a diesel engine is of the order of____________________?
A. 5:25:30:50
B. 25:35:5:35
C. 25:5:10:60
D. 40:30:15:15
E. 25:5:35:35 - The specific fuel consumption for a petrol engine first decreases with increase in fuel air ratio and then increases with further increase in fuel air ratio. The minimum value occurs in the range of__________________?
A. lean mixture
B. chemically correct mixture
C. rich mixture
D. unpredictable
E. none of the above - Diesel engine can work on very lean air fuel ratio of the order of 30 : 1. A petrol engine can also work on such a lean ratio provided__________________?
A. it is properly designed
B. best quality fuel is used
C. can not work as it is impossible
D. flywheel size is proper
E. engine cooling is stopped - The specific fuel consumption of a petrol engine compared to diesel engine of same H.P. is_______________?
A. same
B. more
C. less
D. less or more depending on operating conditions
E. unpredictable - Auto-ignition reaction time for petrol engine first decreases with increase in fuel air ratio, reaches a minimum value and then increases with subsequent increase in fuel air ratio. The minimum value occurs in the region of________________?
A. Lean mixture
B. Chemically correct fuel air ratio
C. Rich mixture
D. Unpredictable - The m.e.p. of a petrol engine first increases as the fuel air ratio is increased and then decreases on further increase in fuel air ratio. The M.E.P is maximum in the zone of________________?
A. lean mixture
B. chemically correct mixture
C. rich mixture
D. unpredictable
E. none of the above - A hmh flame speed is obtained in diesel engine when air fuel ratio is_______________?
A. uniform throughout the mixture
B. chemically correct mixture
C. about 3-5% rich mixture
D. about 10% rich mixture
E. about 10% lean mixture
