A. 1.5
B. 2.0
C. 3.0
D. 4.0
Related Mcqs:
- The ratio of maximum sewage flow to average sewage flow for mains up to 1 m in diameter, is___________________?
A. 1.5
B. 2.0
C. 3.0
D. 4.0 - For sewer mains of 0.5 to 1 m diameter, the ratio of maximum daily sewage flow to the average daily sewage flow is assumed__________________?
A. 1.5
B. 2.0
C. 2.5
D. 3.0 - For trunk sewers more than 1.25 m in diameter, the ratio of the maximum daily sewage flow to the average daily sewage flow is assumed________________?
A. 1.5
B. 2.0
C. 2.5
D. 3.0 - If q is the average sewage flow from a city of population P, the maximum sewage flow______________?
A. Q = [(4 + )/(18 + )] q
B. Q = [(18 + P)/(4 + )] q
C. Q = [(18 + )/(4 + )] q
D. Q = [(5 + )/((15 + )] q - The ratio of minimum hourly flow to the average flow of sewage is_________________?
A. 1/4
B. 1/3
C. 1/2
D. 3/4 - You are asked to design sewer pipes of diameters 0.4 m to 0.9 m at maximum flow, you will assume the sewer flow running at___________________?
A. Full depth
B. Half full
C. Two third full
D. Three fourth full - The sewage discharge in a detritus tank of a treatment plant is 576 litres/sec with flow velocity of 0.2 m/sec. If the ratio of width to depth is 2, the depth is____________________?
A. 100 cm
B. 110 cm
C. 120 cm
D. 150 cm - A five day B.O.D. at 15°C of the sewage of a town is 100 kg/day. If the 5 day B.O.D. per head at 15°C for standard sewage is 0.1 kg/day, the population equivalent is____________________?
A. 100
B. 1000
C. 5000
D. 10000 - If 2% solution of a sewage sample is incubated for 5 days at 20°C and depletion of oxygen was found to be 5 ppm, B.O.D. of the sewage is____________________?
A. 200 ppm
B. 225 ppm
C. 250 ppm
D. None of these - The density of population over 40 hectares is 250/hectare. If water supply demand per day is 200 litres and sewage discharge is 80% of water supply, the sewage flow in sewers of separate system, is_____________________?
A. 0.05552 cumec
B. 0.05554 cumec
C. 0.05556 cumec
D. 0.0556 cumec
