The total length of a cranked bar through a distance D. at 45° in case of a beam of effective length L, is_________________?

Related Mcqs:

1. In long and short wall method of estimation, the length of long wall is the centre to centre distance between the walls and_________________?

   A. Breadth of the wall
   B. Half breadth of wall on each side
   C. One fourth breadth of wall on each side
   D. None of these

2. The cost of the earthwork in excavation for the surface drain of cross-section shown in the given figure for a total length of 5 metres @ Rs. 450% cum, is_______________?

   A. Rs. 400
   B. Rs. 425
   C. Rs. 450
   D. Rs. 500

3. If the formation level of a highway has a uniform gradient for a particular length, and the ground is also having a longitudinal slope, the earthwork may be calculated by_______________?

   A. Mid-section formula
   B. Trapezoidal formula
   C. Prismoidal formula
   D. All the above

4. 88 is 1400 kg/cm2 and bond stress is 6 kg/cm2, the If tensile stress of a steel rod of diameter required bond length of the rod is____________________?

   A. 30 D
   B. 39 D
   C. 50 D
   D. 59 D

5. The ground surface slopes 1 in 50 along a proposed railway embankment 150 m in length. The height of the embankment at zero chainage is 0.5 m, the width is 11 m and side slopes 2:1. If the falling gradient of the embankment is 1 in 150, the quantity of the earthwork calculated by Prismoidal formula, is____________________?

   A. 3250 m3
   B. 3225 m3
   C. 3275 m3
   D. 3300 m3

6. S: 1 and length is______________?

   A. d × d × s
   B. d2 × ( ds)2]
   C. L.D 1 + s2)
   D. 2 L.D 1 + s 2)

7. Brick walls are measured in sq. m if the thickness of the wall is_________________?

   A. 10 cm
   B. 15 cm
   C. 20 cm
   D. None of these

8. The expected out turn of cement concrete 1 : 2 : 4 per mason per day is_________________?

   A. 1.5 m 3
   B. 2.5 m3
   C. 3.5 m3
   D. 5.0 m3

9. The most reliable estimate is_________________?

   A. Detailed estimate
   B. Preliminary estimate
   C. Plinth area estimate
   D. Cube rate estimate

10. According to ISI method of measurement, the order of the sequence is_________________?

    A. Length, breadth, height
    B. Breadth, length, height
    C. Height, length, breadth
    D. None of these