A. along the extended centre line of runway end
B. about 1 km. ahead of the runway threshold
C. at the runway threshold
D. about 7 km. ahead of the runway threshold
Related Mcqs:
- For determining the basic runway.length, the landing case requires that aircraft should come to a stop within p % of the landing distance. The value of p is________________?
A. 40 %
B. 50%
C. 60%
D. 75% - The centre to centre spacing of heliport lighting along the periphery of landing and take off area should be______________?
A. 2.5 m
B. 5.0 m
C. 7.5 m
D. 10.0 m - In approach areas of runways equipped with instrumental landing facilities any object within 4.5 km distance from runway end shall be considered as an obstruction if its height is more than______________?
A. 20 m
B. 30 m
C. 45 m
D. 51 m - Which of the following factors are taken into account for estimating the runway length required for aircraft landing ?
1. Normal maximum temperature
2. Airport elevation
3. Maximum landing weight
4. Effective runway gradient
Select the correct answer using the codes given below Codes?A. 1,2,3 and 4
B. 1,3, and 4
C. 2 and 3
D. 1,2 and 4 - The size of landing area for multiengined helicopters operating under 1FR conditions is______________?
A. 22.5 m x 22.5 m
B. 30 m x 30 m
C. 22.5 m x 30 m
D. 60 mx 120 m - Assertion A : The ratio of arriving and departing aircrafts influences the airport capacity: Reason R :Landing operation is generally given priority over the taking off operation_________________?
Select your answer based on the coding system given below?
A. Both A and R are true and R is the correct explanation of A
B. Both A and R are true and R is not the correct explanation of A
C. A is true but R is false.
D. A is false but R is true - Zero fuel weight of an aircraft is_________________?
A. equal to empty operating weight
B. equal to maximum landing weight
C. less than empty operating weight
D. equal to sum of empty operating weight and the maximum pay load - As per UK design criteria, if LCN of aircraft is between 1.25 to 1.5 times the LCN of pavement, then the number of movements allowed are__________________?
A. Zero
B. 300
C. 3000
D. Unrestricted - Consider the following statements: Wind rose diagram is used for the purposes of_________________?
1. runway orientation
2. estimating the runway capacity
3. geometric design of holding apron
select the correct answer?A. 1 and 2 are correct
B. 2 and 3 are correct
C. 1 and 3 are correct
D. 1 alone is correct - For supersonic transport aircraft, the minimum turning radius of taxiway is________________?
A. 60 m
B. 120 m
C. 180 m
D. 240 m