An R.C.C. beam of 6 m span is 30 cm wide and has a lever arm of 55 cm. If it carries a U.D.L. of 12 t per m and allowable shear stress is 5 kg/cm2, the beam________________?

Related Mcqs:

1. The reinforced concrete beam which has width 25 cm, lever arm 40 cm, shear force 6t/cm2, safe shear stress 5 kg/cm2 and B.M. 24 mt________________?

   A. Is safe in shear
   B. Is unsafe in shear
   C. Is over safe in shear
   D. Needs redesigning

2. A reinforced concrete cantilever beam is 3.6 m long, 25 cm wide and has its lever arm 40 cm. It carries a load of 1200 kg at its free end and vertical stirrups can carry 1800 kg. Assuming concrete to carry one-third of the diagonal tension and ignoring the weight of the beam, the number of shear stirrups required, is___________________?

   A. 30
   B. 35
   C. 40
   D. 45

3. An R.C.C. beam of 25 cm width and 50 cm effective depth has a clear span of 6 metres and carries a U.D.L. of 3000 kg/m inclusive of its self weight. If the lever arm constant for the section is 0.865, the maximum intensity of shear stress, is_______________?

   A. 8.3 kg/cm2
   B. 7.6 kg/cm2
   C. 21.5 kg/cm 2
   D. 11.4 kg/cm2

4. An R.C.C beam of 25 cm width has a clear span of 5 metres and carries a U.D.L. of 2000 kg/m inclusive of its self weight. If the lever arm of the section is 45 cm., the beam is__________________?

   A. Safe in shear
   B. Is safe with stirrups
   C. Is safe with stirrups and inclined members
   D. Needs revision of the section

5. A simply supported beam 6 m long and of effective depth 50 cm, carries a uniformly distributed load 2400 kg/m including its self weight. If the lever arm factor is 0.85 and permissible tensile stress of steel is 1400 kg/cm2, the area of steel required, is___________________?

   A. 14 cm 2
   B. 15 cm2
   C. 16 cm2
   D. 17 cm2

6. If the maximum shear stress at the end of a simply supported R.C.C. beam of 16 m effective span is 10 kg/cm2, the length of the beam having nominal reinforcement, is________________?

   A. 8 cm
   B. 6 m
   C. 8 m
   D. 10 m

7. effective depth and depth of the neutral axis respectively of a singly reinforced If d and n are the beam, the lever arm of the beam, is_________________?

   A. d
   B. n
   C. d + n/3
   D. d – n/3

8. If the maximum shear stress at the end of a simply supported R.C.C. beam of 6 m effective span is 10 kg/cm2, the share stirrups are provided for a distance from either end where, is________________?

   A. 50 cm
   B. 100 cm
   C. 150 cm
   D. 200 cm

9. If permissible working stresses in steel and concrete are respectively 1400 kg/cm2 and 80 kg/cm2 and modular ratio is 18, in a beam reinforced in tension side and of width 30 cm and having effective depth 46 cm, the lever arms of the section, is______________?

   A. 37 cm

   B. 38 cm

   C. 39 cm

   D. 40 cm

10. In the zone of R.C.C. beam where shear stress is less than 5 kg/cm2, nominal reinforcement is provided at a pitch of________________?

    A. One -half lever arm of the section
    B. One-third lever arm of the section
    C. Lever arm of the section
    D. One and half lever arm of the section