Overturning of vehicles on a curve can be avoided by using ________________?

Related Mcqs:

1. The following sights are taken on a “turning point”________________?

   A. foresight only
   B. backsight only
   C. foresight and backsight
   D. foresight and intermediate sight

2. The number of horizontal cross wires in a stadia diaphragm is ________________?

   A. one
   B. two
   C. three
   D. four

3. Different grades are joined together by a ________________?

   A. compound curve
   B. transition curve
   C. reverse curve
   D. vertical curve

4. The angle between the prolongation of the preceding line and the forward line of a traverse is called ________________?

   A. deflection angle
   B. included angle
   C. direct angle
   D. none of the above

5. The permissible error in chaining for measurement with chain on rough or hilly ground is_____________?

   A. 1 in 100
   B. 1 in 250
   C. 1 in 500
   D. 1 in 1000

6. If the true bearing of a line AB is 269° 30′, then the azimuth of the line AB is_____________?

   A. 0° 30′
   B. 89° 30′
   C. 90° 30′
   D. 269° 30′

7. If the magnetic bearing of the sun at a place at noon in southern hemisphere is 167°, the magnetic declination at that place is________________?

   A. 77° N
   B. 23° S
   C. 13° E
   D. 13° W

8. The suitable contour interval for a map with scale 1 : 10000 is______________?

   A. 2 m
   B. 5m
   C. 10 m
   D. 20 m

9. If the reduced bearing of a line AB is N60°W and length is 100 m, then the latitude and departure respectively of the line AB will be________________?

   A. +50 m, +86.6 m
   B. +86.6 m, -50 m
   C. +50m, -86.6 m
   D. +70.7 m,-50 m

10. Which of the following methods of plane table surveying is used to locate the position of an inaccessible point ?

    A. radiation
    B. intersection
    C. traversing
    D. resection