A. 77° N
B. 23° S
C. 13° E
D. 13° W
Related Mcqs:
- A negative declination shows that the magnetic meridian is to the________________?
A. eastern side of the true meridian
B. western side of the true meridian
C. southern side of the true meridian
D. none of the above - In the quadrantal bearing system, a whole circle bearing of 293° 30′ can be expressed as______________?
A. W23°30’N
B. N66°30’W
C. S113°30’N
D. N23°30’W - If the true bearing of a line AB is 269° 30′, then the azimuth of the line AB is_____________?
A. 0° 30′
B. 89° 30′
C. 90° 30′
D. 269° 30′ - If the reduced bearing of a line AB is N60°W and length is 100 m, then the latitude and departure respectively of the line AB will be________________?
A. +50 m, +86.6 m
B. +86.6 m, -50 m
C. +50m, -86.6 m
D. +70.7 m,-50 m - If in a closed traverse, the sum of the north latitudes is more than the sum of the south latitudes and also the sum of west departures is more than the sum of the east departures, the bearing of the closing line is in the________________?
A. NE quadrant
B. SE quadrant
C. NW quadrant
D. SW quadrant - The horizontal angle between the true meridian and magnetic meridian at a place is called______________?
A. azimuth
B. declination
C. local attraction
D. magnetic bearing - The type of surveying which requires least office work is________________?
A. tacheomefry
B. trigonometrical levelling
C. plane table surveying
D. theodolite surveying - The size of a plane table is________________?
A. 750 mm x 900 mm
B. 600 mm x 750 mm
C. 450 mm x 600 mm
D. 300 mm x 450 mm - The instrument used for accurate centering in plane table survey is________________?
A. spirit level
B. alidade
C. plumbing fork
D. trough compass - If the intercept on a vertical staff is ob-served as 0.75 m from a tacheometer, the horizontal distance between tacheometer and staff station is________________?
A. 7.5 m
B. 25 m
C. 50
D. 75 m
