A. 8 db
B. 6 db
C. 5 db
D. 4 db
Related Mcqs:
- What will be the collector efficiency of a power amplifier having zero signal power dissipation of 5 watts and a.c. power output of 2 watts ?
A. 20%
B. 80%
C. 40%
D. 50% - The output power of a transistor amplifier is more than the input power because the additional power is supplied by__________________?
A. Transistor
B. Biasing circuit
C. Collector supply VCC
D. None of the above - An amplifier has a power gain of 100. Its db gain is ________________?
A. 10 db
B. 20 db
C. 40 db
D. None of the above - The output signal voltage and current of a power amplifier are 5V and 200 mA; the values being r.m.s. What is the power output ?
A. 1 W
B. 2 W
C. 4 W
D. None of the above - If a transistor amplifier draws 2mA when input voltage is 10 V, then its input impedance is ____________?
A. 20 kΩ
B. 2 kΩ
C. 10 kΩ
D. 5 kΩ - A 2-transistor class B power amplifier is commonly called ______________ amplifier?
A. Dual
B. Push-pull
C. Symmetrical
D. Differential - If the power level of an amplifier reduces to half, the db gain will fall by___________?
A. 5 db
B. 2 db
C. 10 db
D. 3 db - The maximum a.c. power output from a class A power amplifier is 10 W. What should be the minimum power rating of the transistor used ?
A. 10 W
B. 15 W
C. 5 W
D. 20 W - If the power and current gains of a transistor amplifier are 16500 and 100 respectively, then voltage gain is_____________________?
A. 165
B. 165 x 104
C. 100
D. None of the above - If the maximum collector current due to signal alone is 3 mA, then zero signal collector current should be at least equal to___________________?
A. 6 mA
B. mA
C. 3 mA
D. 1 mA
