A. OR gate
B. AND gate
C. NOT gate
D. None of the above
Related Mcqs:
- The NAND gate is AND gate followed by_________________?
A. NOT gate
B. OR gate
C. AND gate
D. None of the above - A NAND gate is called a universal logic element because______________?
A. it is used by everybody
B. any logic function can be realized by NAND gates alone
C. all the minization techniques are applicable for optimum NAND gate realization
D. many digital computers use NAND gates - The fan put of a 7400 NAND gate is_______________?
A. 2TTL
B. 5TTL
C. 8TTL
D. 10TTL - An OR gate has 6 inputs. The number of input words in its truth table are________________?
A. 6
B. 32
C. 64
D. 128 - In case of OR gate, no matter what the number of inputs, a____________________?
A. 1 at any input causes the output to be at logic 1
B. 1 at any input causes the output to be at logic 0
C. 0 any input causes the output to be at logic 0
D. 0 at any input causes the output to be at logic 1 - Three 10 kΩ resistors are connected in series. A 20 kΩ resistor is connected in parallel across one of the 10 kΩ resistors. The voltage source is 24 V. The total current in the circuit is___________?
A. 900 μA
B. 9 mA
C. 90 mA
D. 800 μA - The NOR gate is OR gate followed by____________________?
A. AND gate
B. NAND gate
C. NOT gate
D. None of the above - NAND gates are preferred over others because these__________________?
A. have lower fabrication area
B. can be used to make any gate
C. consume least electronic power
D. provide maximum density in a chip - If P is the power of a star connected system then what will be power of an equivalent delta connected system?
A. P
B. 3P
C. P/3
D. None of the aboveUpdated by: muhammad rahim
- The parallel combination of a 6.8 kΩ resistor and a 10 kΩ resistor is in series with the parallel combination of a 2.2 kΩ resistor and a 1 kΩ resistor. A 100 V source is connected across the circuit. The resistor(s) with the greatest voltage drop is (are)___________?
A. 6.8 kΩ
B. 2.2 kΩ
C. 6.8 kΩ and 10 kΩ
D. 2.2 kΩ and 1 kΩ