A. 240 N
B. 24 N
C. 2.4 N
D. 0.24 N
Related Mcqs:
- A 200 turn coil having an axial length of 30 mm and a radius of 10 mm is pivoted in a magnetic field having a flux density of 0.8 T. If the coil carries a current of 0.5 A, the torque acting on the coil will be_____________?
A. 8 N-m
B. 0.48 N-m
C. 0.048 N-m
D. 0.0048 N-m - A conductor of length L has current I passing through it, when it is placed parallel to a magnetic field. The force experienced by the conductor will be______________?
A. zero
B. BLI
C. B2LI
D. BLI2 - Which of the following is the unit of magnetic flux density ?
A. weber
B. lumens
C. tesla
D. none of the above - The change of cross-sectional area of conductor in magnetic field will affect______________?
A. reluctance of conductor
B. resistance of conductor
C. A. and B. both in the same way
D. none of the above - How does the magnetic compass needle behave in a magnetic field ?
A. It assures a position right angle to magnetic field
B. It starts rotating
C. It assures a position which follows a line of magnetic flux
D. None of the above - What will be the magnetic potential difference across the air gap of 2 cm length in magnetic field of 200 AT/m ?
A. 2 AT
B. 4 AT
C. 6 AT
D. 10 AT - The stray line of magnetic flux is defined as_____________?
A. a line vertical to the flux lines
B. the mean length of a ring shaped coil
C. a line of magnetic flux in a non-uniform field
D. a line of magnetic flux which does not follow the designed path - The materials are a bit inferior conductors of magnetic flux than air
A. ferromagnetic
B. paramagnetic
C. diamagnetic
D. dielectric - The electromagnet has 50 turns and a current of 1A flows through the coil. If the length of the magnet circuit is 200 mm, what is the magnetic field strength ?
A. 2500 AT/m
B. 250 AT/m
C. 25 AT/m
D. 2.5 AT/m - The two conductors of a transmission line carry equal current I in opposite directions. The force on each conductor is________________?
A. proportional to 7
B. proportional to X
C. proportional to distance between the conductors
D. inversely proportional to I
1 Comment
F=BIL