A. 2.36%
B. 4.76%
C. 6.77%
D. 8.84%
Related Mcqs:
- The speed of a D.C. shunt motor more than its full-load speed can be obtained by_____________?
A. decreasing the field current
B. increasing the field current
C. decreasing the armature current
D. increasing the armature current - The speed of a D.C. shunt motor is required to be more than full load speed. This is possible by______________?
A. reducing the field current
B. decreasing the armature current
C. increasing the armature current
D. increasing the excitation current
E. none of the above methods - Which of the following motor has the poorest speed regulation ?
A. Shunt motor
B. Series motor
C. Differential compound motor
D. Cumulative compound motor - D.C. motor is to a drive a load which is almost nil for certain part of the load cycle and peak value for short duration. We will select this______________?
A. series motor
B. shunt motor
C. compound motor
D. any of the above - No-load speed of which of the following motor will be highest ?
A. Shunt motor
B. Series motor
C. Cumulative compound motor
D. Differentiate compound motor - For the same H.P. rating and full load speed, following motor has poor starting torque_____________?
A. shunt
B. series
C. differentially compounded
D. cumulativelyc’ompounded - As -the load is increased the speed of D.C. shunt motor will____________?
A. reduce slightly
B. increase slightly
C. increase proportionately
D. remains unchanged - If the load on a DC shunt motor is increases, its speed is slightly reduced due to______________?
A. increase in armature current
B. increase in flux
C. decrease in reactance
D. decrease in back emf - By looking at which part of the motor, it can be easily confirmed that a particular motor is D.C. motor?
A. Frame
B. Shaft
C. Commutator
D. Stator - Flywheel is used with D.C. compound motor to reduce the peak demand by the motor, compound motor will have to be_____________?
A. level compounded
B. under compounded
C. cumulatively compounded
D. differentially compounded
