A. Walking beam reheating furnace
B. Reverberatory furnace
C. Tower furnace
D. Tunnel kiln
Related Mcqs:
- Which of the following is not a directly fired furnace ?
A. By-product coke oven
B. Calcination kiln
C. Sintering furnace
D. Open hearth furnace - While the fuel fired furnace can be used upto a maximum temperature of about 1700°C, the electric furnace can be used upto a temperature of about _____________ °C?
A. 2000
B. 3000
C. 4500
D. 6000 - Combustion of furnace oil in a furnace (soaking pit) with preheated combustion air at 400°C results in saving of about __________ percent furnace oil as compared to its combustion with atmospheric air, if the flue gas outlet temperature from the soaking pit is 1200°C ?
A. 5
B. 60
C. 20
D. 40 - Temperature of a furnace fired with low calorific value fuel gas (i.e. lean gas) can be increased by______________________?
A. Preheating the combustion air
B. Oxygen enrichment of combustion air
C. Preheating the fuel gas
D. All A., B. & C. - Oxygen percentage in the flue gas coming out of a gaseous fuel fired furnace should be ideally about _____________ percent?
A. < 2
B. < 5
C. < 8
D. < 10 - Overall thermal efficiency of a lumpy coal fired suitably designed heating furnace, if operated & maintained properly may be about ____________ percent?
A. 10-15
B. 25-30
C. 45-50
D. 65-70 - An improved and fuel efficient version of the pusher type reheating furnace is the ______________ furnace?
A. Walking beam
B. Shaft
C. Tunnel
D. Rotary hearth - The electric furnace in which heat is produced by a combination of induced current and skin effect is called _____________ furnace?
A. Arc
B. Resistance
C. Low frequency induction
D. High frequency induction - Ceramic coating material for furnace refractory, which increases its emissivity and thus the radiation heat transfer rate in the furnace, comprises of_________________?
A. Graphite powder
B. Thoria
C. Zircon powder
D. Beryllium - An electric furnace producing heat by means of an electric arc struck between each of three electrodes and the charge is called ____________ furnace?
A. Resistance
B. Arc
C. Low frequency induction
D. None of these
