At standard conditions, N2 + 2O2 ⇌ 2NO2; ΔG° = 100 kJ/mole NO + ½O2 ⇌ 2NO2; ΔG° = -35 kJ/mole The standard free energy of formation of NO in kJ/mole is___________________?

Related Mcqs:

1. One mole of methane undergoes complete combustion in a stoichiometric amount of air. The reaction proceeds as CH4 + 2O2 → CO2 + 2H2O. Both the reactants and products are in gas phase. ΔH°298 = – 730 kJ/mole of methane. Mole fraction of water vapour in the product gases is about_____________________?

   A. 0.19
   B. 0.33
   C. 0.40
   D. 0.67

2. What is the total pressure exerted by a mixture of 0.45 kg mole of benzene, 0.44 kg mole of toluene and 0.23 kg mole of o-xylene at 100°C, if their vapor pressures at 100°C are 1340, 560 and 210 mmHg respectively ?

   A. 756.2
   B. 780.5
   C. 801.5
   D. 880.5

3. The accumulation in a steady state combustion process, burning 1 kg mole of carbon with 1 kg mole of oxygen thereby producing 1 kg mole of carbon dioxide, is _____________ kg mole?

   A. 1
   B. 0
   C. 16
   D. 44

4. The combustion equations of carbon and carbon monoxide are as follows: C + O2 = CO2, ΔH = – 394 kJ/kg .mole CO + ½ O2 = CO2, ΔH = – 284.5 kJ/kg. mole. The heat of formation of CO is _____________ kJ/kg. mole?

   A. -109.5
   B. +109.5
   C. +180
   D. +100

5. At 100°C, water and methylcyclohexane both have vapour pressures of 1 atm. Also at 100°C, the latent heats of vaporisation of these compounds are 40.63 kJ/mole for water and 31.55 kJ/mole for methylcyclohexane. The vapour pressure of water at 150°C is 4.69 atm. At 150°C, the vapour pressure of methylcyclohexane would be expected to be_________________?

   A. Significantly less than 4.69 atm
   B. Nearly equal to 4.69 atm
   C. Significantly more than 4.69 atm
   D. Indeterminate due to lack of data

6. The ratio of existing moles of vapor per mole of vapor free gas to the moles of vapor that would be present per mole of vapor free gas, if the mixture were saturated at the existing temperature & pressure, is termed as the_____________________?

   A. Relative humidity
   B. Relative saturation
   C. Percentage saturation
   D. None of these

7. A very dilute solution is prepared by dissolving ‘x1’ mole of solute in ‘x2’ mole of a solvent. The mole fraction of solute is approximately equal to_________________?

   A. x1/x2
   B. x2/x1
   C. 1 – (x1/x2)
   D. 1/x2

8. A fluid gas produced on burning furnace oil contains 0.15 gm mole of CO2, 0.05 gm mole of oxygen and 0.80 gm mole of N2. What is its molecular weight ?

   A. 28.6
   B. 30.0
   C. 30.6
   D. 32.6

9. A butane isomerisation process produces 70 k.mole/hr of pure iso-butane. A purge stream removed continuously, contains 85% n-butane and 15% impurity (mole%). The feed stream is n-butane containing 1% impurity (mole%). The flow rate of the purge stream will be_________________?

   A. 3 kmole/hr
   B. 4 kmole/hr
   C. 5 kmole/hr
   D. 6 kmole/hr

10. One kg of saturated steam at 100°C and 1.01325 bar is contained in a rigid walled vessel. It lias a volume of 1.673 m3. It cools to 98°C; the saturation pressure is 0.943 bar ; one kg of water vapour under these conditions has a volume of 1.789 m3. The latent heat of condensation (kJ/kg-1 ) under these conditions is___________________?

    A. 40732
    B. 2676
    C. 2263
    D. 540