A. Thermoplastic
B. Melamine
C. Addition
D. None of these
Related Mcqs:
- Melt spinning of polymers involves the forcing of polymer melt through spinnerates (fine holes) into an atmosphere kept at a temperature lower than the melting point of the polymer, which causes the fine diameter polymer melt to harden into filaments. Melt spinning is not used in case of the _____________ fibres?
A. Acrylic
B. Polyester
C. Nylon 6:6
D. Polypropylene - In case of dry spinning of polymers, the polymer solution in a volatile solvent is forced through the spinnerates into a warm air chamber, where the solvent evaporates leaving behind the polymer in the filament form. Dry spinning is used for _______________ fibres?
A. Polythene
B. PVC
C. Rayon
D. Polyvinyl acetate - In a cross linked polymer, the monomeric units are linked together to constitute a three dimensional network. Which of the following is a cross-linked polymer ?
A. Bakelite (phenol formaldehyde)
B. Polyester
C. Polythene
D. Nylon-6 - Unbreakable crockeries are made from ______________ polymers?
A. Polystyrene
B. Melamine
C. Polystyrene
D. Polyurethane - Neoprene which is used for making shoe heels & belts is superior to natural rubber in its stability to aerial oxidation and resistance to oils & other solvents. The monomer used for making neoprene is_________________?
A. Chloroethane
B. Chloroprene
C. Isoprene
D. None of these - Epoxy resin is a polymer containing two or more groups of the bellow fig. is called epoxide group or ethoxyline group. It is a _______________?
A. Polyamide & an elastomer
B. Good adhesive
C. Surface coating agent
D. Both B. and C. - Synthetic polymer produced by using terephthalic acid and ethylene glycol is _________________?
A. Terylene
B. Nylon-66
C. PVC
D. Polystyrene - Which of the following is a polymer of Hexamethylene diamine and adipic acid ?
A. Nylon-6
B. Nylon-66
C. Nylon-6, 10
D. Epoxy resin - In a co-polymer, the repeating units contain two different monomers. Which of the following is a copolymer ?
A. PTFE
B. Buna-S
C. PMMA
D. Polycaprolactam - Which of the following low molecular weight (<104), soft & waxy polymer is used in „chewing gum‟ ?
A. Cellulose acetate
B. Polyvinyl acetate
C. Thiokol
D. PVC
