A. 58
B. 98
C. 348
D. 588
Related Mcqs:
- Liquid metal (e.g., molten sodium) is preferred as a coolant in case of a/an ______________ reactor?
A. Homogeneous
B. Graphite moderated
C. Fast breeder
D. Enriched uranium (3% U-235) fuelled - Molten sodium is used as a coolant in a fast breeder reactor, because of its_________________?
A. Excellent moderating properties
B. Neutron breeding capability
C. Faster heat removal capability from the core
D. Capability to increase the reaction rate in the core - Molten sodium (as a coolant in fast breeder reactor) ?
A. Can’t attain high temperature at normal pressure
B. Is not at all corrosive, even at a higher temperature
C. Is highly radioactive at elevated temperatures and can cause explosion, when it comes in
contact with air or water
D. None of these - Which of the following nuclear reactors is the most efficient thermodynamically while operating between the same temperature and pressure limits of the reactor ?
A. Molten sodium cooled
B. CO2 gas cooled
C. Pressurised water
D. Boiling water - Pressure of CO2 gas (which is a coolant) in the Calder-Hall nuclear reactor is ______________ kgf/cm2?
A. 0.2
B. 7
C. 35
D. 50 - Pressure in a Pressurised Water Reactor (PWR) is used for ____________________?
A. Maintaining constant pressure in the primary cooling circuit under varying loads
B. Superheating the steam
C. Pressurising the water in the primary coolant circuit
D. None of these - Thermal nuclear reactors using enriched uranium as fuel contains a maximum of ____________ percent fissile material i.e. U-235?
A. 1
B. 2
C. 3
D. 7 - ____________ moderator is used in a fast breeder reactor?
A. Graphite
B. Heavy water
C. Beryllium
D. No - ____________ nuclear reactor does not require a heat exchanger to supply steam to power turbine?
A. Molten sodium cooled
B. Helium cooled
C. Boiling water
D. Pressurised water - If 4 gm of a radioisotope has a half life period of 10 days, the half life of 2 gm of the same isotope will be ____________ days?
A. 5
B. 10
C. 20
D. 30
