A. Blast furnace
B. Hot blast stove
C. Cupola
D. Wall of coke oven
Related Mcqs:
- Fireclay bricks is not used for lining the_______________?
A. Cupola
B. Gas producer
C. Bottom of hot metal mixer
D. Roof of open hearth furnace - Fireclay bricks are not used in the________________?
A. Beehive coke oven
B. By-product coke oven walls
C. Combustion chamber of B.F. stoves
D. Coke oven regenerators - Fireclay bricks are used in the______________?
A. Coke ovens regenerator
B. Outer lining of L.D. converter
C. Hearth bottom of blast furnace
D. Coke oven walls - Silica bricks are never used for lining the_________________?
A. Beehive coke ovens
B. By-product coke ovens
C. Dome of blast furnace stoves
D. Roof of open hearth furnace - With increase in the porosity, thermal spalling resistance of fireclay brick_______________?
A. Increases
B. Decreases
C. Remain same
D. May increase or decrease - Fireclay refractories___________________?
A. Are not resistant to the action of basic slags
B. Combine with salts (e.g. chlorides sulphates etc.) & bases (e.g. lime, magnesia etc.) forming
fusible aluminates silicates etc
C. Shrink during firing
D. All A., B. and C. - Permeability of bricks is a measure of the___________________?
A. Refractoriness
B. Melting point
C. Rate at which a fluid will pass through the pores
D. Expansion during heating - Refractory bricks with lower permeability is produced by using _________________?
A. Higher firing temperature
B. Higher moulding pressure
C. Finer grog size
D. All A., B. and C. - An insulating refractory brick should have high porosity and low thermal conductivity. Which of the following is not used for inducing porosity in the insulating refractory bricks during its manufacture ?
A. Cork
B. Saw dust
C. Sand
D. Chemically prepared foam - Roof of a basic electric furnace is made of ______________ bricks?
A. Superduty fireclay
B. Silica
C. Chromite
D. None of these