Heat in BTU necessary to increase the temperature of 1 lb of gas and its accompanying vapour by 1°F is called the________________?

Related Mcqs:

1. If the solubilities of different components (in a liquid-liquid extraction system) increase with rise in temperature, then the temperature above which they dissolve completely is known as the critical solution temperature (CST or consolute temperature). If solubilities increase with decrease in temperature, then CST is the temperature below which they dissolve completely. If a binary system has no critical solution temperature, it implies that___________________?

   A. The system comprises of partially miscible liquids
   B. The system comprises of miscible liquids
   C. The system comprises of an azeotrope
   D. On heating, a vapor phase will appear; while on cooling, a solid phase will appear

2. An air-water vapour mixture has a dry bulb temperature of 60°C and a dew point temperature of 40°C. The total pressure is 101.3 kPa and the vapour pressure of water at 40°C and 60°C are 7.30 kPa and 19.91 kPa respectively. The humidity of air sample expressed as kg of water vapour/kg of dry air is__________________?

   A. 0.048
   B. 0.079
   C. 0.122
   D. 0.152

3. Condensation of a vapour-gas mixture just begins, when (where, p = partial pressure of the vapour P = vapour pressure of the liquid) ?

   A. p = P
   B. p >>P
   C. p < P
   D. p << P

4. Steady state temperature reached by a small amount of liquid evaporating into a large amount of unsaturated vapour-gas mixture is called the ________________ temperature?

   A. Dry-bulb
   B. Wet-bulb
   C. Dew point
   D. Adiabatic saturation

5. The temperature to which a vapour gas mixture must be cooled (at varying humidity) to become saturated is called the ______________ temperature?

   A. Dew point
   B. Wet bulb
   C. Dry bulb
   D. None of these

6. At equilibrium the concentration of water in vapour phase (C*) in kg/m3 of air space and the amount of water (m) adsorbed per kg of dry silica gel are related by, C* = 0.0667m. To maintain dry conditions in a room of air space 100m3 containing 2.2 kg of water vapour initially, 10 kg of dry silica gel is kept in the room. The fraction of initial water remaining in the air space after a long time (during which the temperature is maintained constant) is_________________?

   A. 0.0
   B. 0.2
   C. 0.4
   D. 1.0

7. The wet and ‘dry bulb temperature for a vapour-gas mixture are 25°C and 30°C respectively. If the mixture is heated to 45°C at constant pressure, the wet bulb temperature will be ______________ °C ?

   A. 25
   B. > 25
   C. < 25
   D. – 25

8. The wet and ‘dry bulb temperature for a vapour-gas mixture are 25°C and 30°C respectively. If the mixture is heated to 45°C at constant pressure, the wet bulb temperature will be ______________ °C?

   A. 25
   B. > 25
   C. < 25
   D. – 25

9. With increase in the liquid flow rate at a fixed gas velocity in a randomly packed counter current gas-liquid absorption column, the gas pressure drop___________________?

   A. Decreases
   B. Remains unchanged
   C. Increases
   D. Decreases exponentially

10. Moisture in a substance exerting an equilibrium vapour pressure less than that of pure liquid at the same temperature is called the _______________ moisture?

    A. Bound
    B. Unbound
    C. Critical
    D. None of these