A. velocity of various parts
B. acceleration of various parts
C. displacement of various parts
D. angular acceleration of various parts
E. all of the above
Related Mcqs:
- Klein’s construction gives a graphica construction for________________?
A. slider-crank mechanism
B. velocity polygon
C. acceleration polygon
D. four bar chain mechanism
E. angular acceleration - The Klein’s method of construction for reciprocating engine mechanism _______________?
A. is based on acceleration diagram
B. is a simplified form of instantaneous center method
C. utilises a quadrilateral similar to the diagram of mechanism for reciprocating engine
D. enables determination of Corioli’s component
E. none of the above - Klein’s construction can be used to determine acceleration of various parts when the crank is at_________________?
A. inner dead centre
B. outer dead centre
C. right angles to the link of the stroke
D. at 45° to the line of the stroke
E. all of the above - Klein’s construction can be used when_________________?
A. crank has a uniform angular velocity
B. crank has non-uniform velocity
C. crank has uniform angular acceleration
D. crank has uniform angular velocity and angular acceleration
E. there is no such criterion - The Bifilar suspension method is used to determine__________________?
A. natural frequency of vibration
B. position of balancing weights
C. moment of inertia
D. centripetal acceleration’
E. angular acceleration of a body - Pitch point on a cam is_________________?
A. any point on pitch curve
B. the point on cam pitch curve having the maximum pressure angle
C. any point on pitch circle
D. the point on cam pitch curve having the minimum pressure angle
E. none of the above - Ackermann steering gear consists of_______________?
A. sliding pairs
B. turning pairs
C. rolling pairs
D. higher pairs
E. lower pairs - To transmit power from one rotating shaft to another whose axes are neither parallel nor intersecting, use__________________?
A. spur gear
B. spiral gear
C. bevel gear
D. worm gear
E. crown gear - The velocity of any point in mechanism relative to any other point on the mechanism on velocity polygon is represented by the line________________?
A. joining the corresponding points
B. perpendicular to line as per A.
C. not possible to determine with these data
D. at 45° to line as per A.
E. none of the above - In S.H.M., the velocity vector w.r.t. displacement vector _________________?
A. leads by 90°
B. lags by 90°
C. leads by 180°
D. are in phase
E. could be anywhere.
